850红外
XINGLIGHT
DIP
无铅环保型
直插式
单件包装
大功率
企业名:深圳市成兴光电子科技有限公司
类型:贸易/代理/分销
电话:
18002502217
0755-82702400
手机:
联系人:欧小姐/左先生
邮箱:2850507687@qq.com
地址:广东深圳福田区华强电子世界一店三号楼一楼C006房间(展销柜)福田区佳和华强大厦A座1405-07室(办事处)
∟ 贴片/片式/SMD二极管(12)∟ 激光(光电)二极管(3)
台湾晶元42mil芯片,可媲美OSRAM:SFH-4233效果,工作电流1A,一颗抵市面40mil940晶片4颗以上,效果。
JNJ-LOJV0113W140
n Features(特征)
1)Dimension: Top
封装外形:表面贴装型
2) Excellent heat conductive assembly.
导热封装方式
3)High radiant intensity.
高光功率强度发射
4)Wide viewing angle.
140度宽角度发光
5)Soldering methods: IR reflow soldering
焊接方式:红外热风回流焊
6)The product itself will remain within RoHS
符合ROHS相关标准
n Applications(典型应用)
The best light surveillance cameras
监控摄像机理想光源
n Package Dimensions( 封装尺寸 )
Notes:
1.All dimensions are in millimeters .
(单位:毫米)
2.Tolerance is±0.1 unless otherwise noted.
(允差: ±0.1 ,另有标注除外.)
3.Specifications are subject to change without notice.
(规格若有变动,恕不另行通知)
Parameter |
Symbol |
Condition |
Min. |
Typ. |
Max. |
Unit |
|
Forward voltage |
Vf1 |
If=10uA |
|
1.0 |
|
V |
|
Vf2 |
If=350mA |
|
1.5 |
1.9 |
V |
||
Reverse current |
If |
Vr=10V |
|
|
5.0 |
uA |
|
Peak wavelength |
λp |
If=350mA |
940 |
955 |
970 |
nm |
|
Radiant flux |
Po |
H11 |
If=350mA |
190 |
200 |
220 |
mW |
Parmeter |
Symbol |
Absolute maximum Rating |
Unit |
Forward DC current |
If |
≤1000 |
mA |
Reverse voltage |
Vr |
≤10 |
V |
Power Dissipation |
Pd |
2000 |
mW |
Operation Temperature |
Topr |
-20~+75 |
℃ |
Storage Temperature |
Tstg |
-30~+80 |
℃ |
Temperature during Soldering |
--- |
280(<10sec) |
℃ |
n Characteristic Curves:
n Application Notes
Storage
n Handling
Handle the component along the side surfaces by using forceps or appropriate tools. The forceps or other appropriate tools should not put any pressure on the lens.it’s also strictly forbidden to poke and press the lens.
n Thermal Management
When the LED is drived by large current.the TJ(junction temperature)will exceed its limit.which will shorten lifetime of LEDs seriously.The thermal management should effectively reduce the resistance of products.
The general way foe the thermal management is to mount the LED on a metal core printed circuit board(MCPCB).It is recommended that the surface area of the MCPCB is at least 20 cm2 for 1W LED(and 30cm2 foe 3W LED),while we recommend using an additional heat sink,and the MCPCB heat-conducting adhesive with a thermal conductivity greater than 3.0W/mK.The thermal glue or paste should with a thermal conductivity greater than 3.0W/mK and its thickness must be less than 100um.
n Claning
When cleaning is necessary,using clean soft cloth and dipping the isopropyl alcohol to erasure the dirt gently.Do not clean it with the solvents such as Acetone,lest erode or destroy the LEDs.
n Electrical Notes
n Antistatic
The LEDs are electrostatic sensitive devices,so antistatic steps should be taken during the processing.
n Reflow Solding Profile for lead free solding
:,手机:,:王先生
咨询
地址:广东省深圳市福田区华强电子广场C座12B
企业名:深圳市成兴光电子科技有限公司
类型:贸易/代理/分销
电话:
18002502217
0755-82702400
手机:
联系人:欧小姐/左先生
邮箱:2850507687@qq.com
地址:广东深圳福田区华强电子世界一店三号楼一楼C006房间(展销柜)福田区佳和华强大厦A座1405-07室(办事处)
友情链接: 深圳市元东发电子有限公司