RMALDCBS1X16
gpsnetworking
企业名：上海汀江电子科技有限公司
类型：经销商
电话： 400-6787564
手机：18621147449
联系人：邓小姐
QQ： 
邮箱：tj_line@126.com
地址：上海上海市浦东新区
RMALDCBS1X16
Technical Product Data
Features
• Extremely Flat Group Delay
Less that 1ns variation
• High Isolation Option
>35dB of isolation between adjacent output ports
• Phase Matched Outputs
Phase (J1 – J2) < 1.0o
Description
The RMALDCBS1X16 GPS Rack Mount Amplified Splitter is a one input, sixteen output device. The frequency response covers the GPS L1 & L2 bands with excellent gain flatness. In the normal configuration, the splitter is powered by a transformer that supplies power to the splitter’s amplifier and roof antenna. The outputs are DC loaded with 200Ω resistors to simulate the antenna current draw. Product is ideal for timing and testing applications where the GPS carrier signal is required by up to 16
GPS devices simultaneously.
Electrical Specifications, TA = 250C
|
Parameter |
Conditions |
Min |
Typ |
Max |
Units |
|
Freq. Range |
Ant – Any Output, Unused Outputs - 50Ω |
1.1 |
|
1.7 |
GHz |
|
In/Out Imped. |
Ant, J1, J2, J3, J4, J5, J6, J7, J8 |
|
50 |
|
Ω |
|
Gain |
Ant – Any Output, Unused Outputs - 50Ω |
13 |
14.5 |
16.5 |
dB |
|
Gain High Isolation |
Ant – Any Output, Unused Outputs - 50Ω |
-1.0 |
0.0 |
1.0 |
dB |
|
Input SWR |
All ports - 50Ω |
|
|
2.0:1 |
- |
|
Output SWR |
All ports - 50Ω |
|
|
1.3:1 |
- |
|
Noise Figure |
Normal Config., Ant – Any Output, Unused Outputs - 50Ω |
|
3.8 |
4.3 |
dB |
|
Gain Flatness |
| L1 – L2 | ; Ant – Any Output, Unused Outputs - 50Ω |
|
0.5 |
1 |
dB |
|
Amplitude Balance |
| J1 – J2 | ; Ant – Any Output, Unused Outputs - 50Ω |
|
|
0.5 |
dB |
|
Phase Balance |
Phase (J1 – J2) ; Ant – Any Output, Unused Outputs - 50Ω |
|
|
1.0 |
deg |
|
Isolation |
Hi Isolation Config, Adjacent Ports, Ant - 50Ω (see plots) |
35 |
|
|
dB |
|
Group delay Flatness |
τd,max - τd,min : Ant – J1, J2 - 50Ω ; Ant – J2, J1 - 50Ω |
|
|
1 |
ns |
|
Current |
Amplifier Current Draw, All ports - 50Ω |
|
|
15 |
mA |
Available Options
|
Network Power Supply |
||
|
Source Voltage Options |
VOLTAGE INPUT |
STYLE |
|
110VAC |
Transformer (Wall Mount) |
|
|
220 VAC |
Transformer (Wall Mount) |
|
|
240 VAC (United Kingdom) |
Transformer (Wall Mount) |
|
|
Customer Supplied DC 9-32 VDC |
Military Style Connector |
|
|
Output Voltage Options (1) |
DC VOLTAGE OUT |
MAX CURRENT OUT FOR CORRESPONDING Vout(2) |
|
5 V |
110mA |
|
|
7.5V |
130mA |
|
|
9V |
140mA |
|
|
12V |
170mA |
|
|
15V |
210mA |
|
|
Custom |
TDB |
|
|
Output Port Isolation Options |
||
|
High Isolation Option |
High Isolation, 35dB min. Output Port – to – Output Port |
|
|
Pass/Block DC Options |
||
|
DC Blocked (1) |
Jx (x=1…16) are DC blocked, Pass DC to ANT. |
|
|
RF Connector Options |
||
|
Connector Options |
CONNECTOR STYLE |
CHARGE |
|
Type N, TNC, SMA and BNC |
NC |
|
(1) With Network Option, any RF port (input or output) can be DC blocked or can pass the network DC
voltage.
(2) TA = +50oC. Assuming Source of 110V or 220V Wall Mount Transformer. In general, maximum output current can be determined by:
Iout ≤ 2.9 / (VsourceDC – Vout) A
Part Number
N HI RMALDCB S1X16-N/5/110
Network Option:
N = Networked; Blank = No Network
Isolation Option:
HI = High Isolation Option
Amplified, Loaded:
A = Amplified; L = 200Ω load/output
DC Options:
DCB = DC Blocked; PDC = Pass DC Connector Options:
N = N type; S = SMA; T = TNC; B = BNC
DC Output Voltage:
3.3, 5, 7.5, 9, 12, 15, CXX (Custom “XX” denotes desired V) Source Voltage:
110 -Transformer, 220 – Transformer, 240 – Transformer, MC – Military Conn. (User supplies
DC Voltage)
Mechanical
Dimensions: Height: 5.4” Length: 18.0” Width: 17.0”
Weight: 13.6 lbs. Operating Temp. Range: -40o to +
友情链接： 深圳市元东发电子有限公司
