Features
• Implements CAN V2.0B at 1 Mb/s:
- 0 – 8 byte length in the data field
- Standard and extended data and remote
frames
• Receive buffers, masks and filters:
- Two receive buffers with prioritized message
storage
- Six 29-bit filters
- Two 29-bit masks
• Data byte filtering on the first two data bytes
(applies to standard data frames)
• Three transmit buffers with prioritizaton and abort
features
• High-speed SPI Interface (10 MHz):
- SPI modes 0,0 and 1,1
• One-shot mode ensures message transmission is
attempted only one time
• Clock out pin with programmable prescaler:
- Can be used as a clock source for other
device(s)
• Start-of-Frame (SOF) signal is available for
monitoring the SOF signal:
- Can be used for time-slot-based protocols
and/or bus diagnostics to detect early bus
degredation
• Interrupt output pin with selectable enables
• Buffer Full output pins configurable as:
- Interrupt output for each receive buffer
- General purpose output
• Request-to-Send (RTS) input pins individually
configurable as:
- Control pins to request transmission for each
transmit buffer
- General purpose inputs
• Low-power CMOS technology:
- Operates from 2.7V – 5.5V
- 5 mA active current (typical)
- 1 μA standby current (typical) (Sleep mode)
• Temperature ranges supported:
- Industrial (I): -40°C to +85°C
- Extended (E): -40°C to +125°C

控制器类型 ：	Stand-Alone CAN Controller With SPI Interface
接口 ：	SPI 串行
电源电压 ：	2.7 V ~ 5.5 V
电流 - 电源 ：	10mA
工作温度 ：	-40°C ~ 85°C
安装类型 ：	表面贴装
封装/外壳 ：	18-SOIC（0.300", 7.50mm 宽）
包装 ：	管装

企业名：深圳市广辉电子有限公司

类型：

电话： 13686868407

手机：13686868407

联系人：陈树辉

QQ：

微信：

邮箱：659974144@qq.com

地址：广东深圳深圳市深南东路金城大厦3-10-A//柜台:深圳市华强北路新华强电子世界Q3B026室