RθJCFilm (J) to Case (C)ResistanceMax.Voltage0.020Ω to 1.00KPackageTO-220StyleCurrentLimited250 Vrms6.94°C/Watt2.31°C/Watt2.08°C/Watt60 ArmsMax. CurrentRating (Amps)60 ArmsPowerRating18 Watts *60 Watts *I =P/RCurrentLimited0.010Ω3.47°C/Watt60 Arms36 Watts *54 Watts *
MP2060 Kool-Pak® Clip Mount Power Film Resistor
2
5100150CASE TEMPERATURE, °CRATED POWER % All power and *ociated overload ratings are derated based upon case temperature using the
derating curve. The case temperature is measured at the center of the ceramic mounting surface, with the part properly mounted and under electrical load. Without a heat sink, when in free air at +25°C, the MP2060 is rated for 2.5 watts.
The thermal design should satisfy the following equation:
Case Temperature (Tc) + [Thermal Resistance (RθJC) x power applied (Watts)] ≤ 150°C, considering the full operating temperature range of the application.
Mounting Note: Mount on a *ooth, clean and flat heat sink surface with a thermal interface material, such as
thermal grease. The entire exposed ceramic portion must be in contact with the heat sink. When using a
spring clip, it is recommended that a mounting force of 8 to 30 pounds (35 to 130 N) be applied to the center of
the package. The clip should be round or *ooth in the contact area to avoid concentrating the load on a *all point of the plastic body of the package. Another mounting option is to use a pressure bar method which can achieve a greater mounting force with a greater contact area.
For additional applications information regarding mounting and pulse handling see the Caddock Applications Notes at caddock.com or contact Applications Engineering.
* Derating Using Case Temperature (TC):
Derating Curve
0.005 Ω 5%
0.010 Ω 2%
0.015 Ω 2%
0.020 Ω
0.025 Ω
0.030 Ω
0.033 Ω
0.040 Ω
0.050 Ω
0.075 Ω
0.10 Ω
0.15 Ω
0.20 Ω
0.25 Ω
0.30 Ω
0.33 Ω
0.40 Ω
0.50 Ω
0.75 Ω
1.00 Ω
1.50 Ω
2.00 Ω
2.50 Ω
3.00 Ω
3.30 Ω
4.00 Ω
5.00 Ω
7.50 Ω
8.00 Ω
10.0 Ω
12.0 Ω
15.0 Ω
20.0 Ω
25.0 Ω
27.0 Ω
30.0 Ω
33.0 Ω
40.0 Ω
47.0 Ω
50.0 Ω
56.0 Ω
75.0 Ω
100 Ω
120 Ω
150 Ω
200 Ω
250 Ω
300 Ω
330 Ω
400 Ω
470 Ω
500 Ω
560 Ω
750 Ω
1.00 K
Standard Resistance Values:
Tolerance: 1% Standard (except as noted)
For custom values and tolerances contact Applications Engineering
Ordering Information:
DIMENSIONS IN INCH* AND (MILLIMETERS)
Specifications:
Temperature Coefficient:
TC referenced to +25°C, ΔR taken at +150°C
0.50 ohm and above, -20 to +80 ppm/°C
0.050 ohm to 0.49 ohm, 0 to +100 ppm/°C
0.015 ohm to 0.049 ohm, 0 to +200 ppm/°C
0.005 ohm to 0.014 ohm, 0 to +300 ppm/°C
Operating Temperature: -55°C to +150°C
Inductance: 10 nH t*ical in series when measured at the shoulder of the lead.
Capacitance: <1 pf t*ical without heat sink.
DWV: 1500 VrmsAC isolation to the mounting surface or a clip in contact with the * surface.
Insulation Resistance: 10,000 Megohms, min. The resistor element is electrically isolated from the mounting surface.
Momentary Overload: 1.5 times rated power for
5 seconds, ΔR ±(0.5 percent + 0.0005 ohm) max.
Load Stability: 2000 hours at rated power
ΔR less than ±(1 percent +0.0005 ohm).
Moisture Resistance: Mil-Std-202, Method 106, ΔR ±(0.5 percent + 0.0005 ohm) max.
Thermal Shock: Mil-Std-202, Method 107,
Cond. F, ΔR ±(0.5 percent + 0.0005 ohm) max.
Shock: 100G, Mil-Std-202, Method 213,
Cond. I, ΔR ±(0.4 percent + 0.0005 ohm) max.
Vibration, High Frequency: Mil-Std 202,
Method 204, Condition D, ΔR ±(0.4 percent
+ 0.0005 ohm) max.
Terminal Strength: Mil-Std-202, Method 211, Cond. A (Pull Test) 5 lbs., ΔR ±(0.2 percent
+ 0.0005 ohm) max.
Terminal Material: Solderable
Measurement Note: Resistance measurements shall be made at 0.2 inch (5.08 mm) from the resistor body.
These products are covered by one or more
patents, also patents pending.
• Up to 60 Watts continuous power at +25°C case temperature, 0.020Ω and above.
• Up to 60 Amps continuous current at +25°C case temperature, 0.015Ω and below.
• TO-220 Style package utilizes proven power semiconductor thermal solutions.
• Equivalent to UL94 V-0 flammability rating.
• Excellent pulse/surge performance.
• Non-inductive design for high speed switching, snubbers and rf applications.
• Operation up to +150°C case temperature.
• Electrically isolated case.

企业名：上海集新电子通讯器材有限公司

类型：经销商

电话： 029-88221540

手机：13720772046

联系人：白卫平

QQ：

邮箱：baiweiping@365-24.com.cn

地址：陕西西安西安市雁塔区太白南路263号