Compact microstepping drive with advanced current control
Step (pulse) & direction, CW/CCW pulse, or A/B quadrature pulse control
On-board oscillator with analog speed reference
Versatile joystick operation
Streaming serial command mode (SCL)
Wide current range 0.1 to 10.0 A/phase (peak of sine) with idle current reduction
Advanced anti-resonance algorithm
Torque ripple smoothing
Microstepping and Microstep Emulation
3 digital inputs, 1 digital output, optically isolated
1 analog input, 0-5 volt range
RS-232 cable and mating connectors included

 

The ST10-S stepper drive is a DC-powered microstepping drive for controlling two-phase, bipolar step motors. It offers advanced current control and a sophisticated 3rd generation anti-resonance algorithm that electronically dampens motor and system resonances to improve motor smoothness and usable torque over a wide speed range. The drive also employs electronic torque ripple smoothing and microstep emulation to greatly reduce motor noise and vibration. The drive must be powered from 24-80 VDC and can output up to 10.0 A/phase (peak-of-sine) to the step motor. Over-voltage, over-temperature and over-current protection features prevent damage while running in adverse conditions. The drive is complemented by a specifically matched set of NEMA 23 and NEMA 34 frame stepper motors (see Related and Recommended products below).

The ST10-S can operate in the following control modes: step (pulse) & direction, velocity (oscillator), streaming serial commands (SCL), and operation with an Applied Motion 4-axis or 8-axis SiNet Hub. All ST drives are setup and configured using Applied Motion’s ST Configurator™ software. Preconfigured motor setup files included with ST Configurator™ make it easy to set up the drive for optimum results.

For connecting to external devices such as step & direction control signals, incremental encoders, limit switches, proximity or photoelectric sensors, PLC I/O, lamps, and other devices, the drive comes with 3 digital inputs, 1 digital output, and 1 single-ended analog input. Adjustable digital filters are present on the digital inputs for enhanced reliability in noisy environments.

The drive comes with an RS-232 port for configuration, serial communications and programming.

All ST drives are CE approved and RoHS compliant.

企业名：深圳市原力达电子有限公司

类型：贸易/代理/分销

电话： 0755-83722245
0755-28194352
0791-86663634
0791-86227604

手机：13410646086
13682394352

联系人：周洁/万玲/程盛钦/程效良

QQ：

邮箱：270086795@QQ.COM

地址：广东深圳深圳分公司：深圳市坪山区坑梓街道沙田开沃大厦C座1813室/南昌分公司：南昌市高新区京东路恒大高新研发楼606-607/ 香港分公司：ROOM 803,CHEVALIER HOUSE 45-51