国产
U*-BM 短体焊线式
电脑
插头/插座
U*
单卡
1
1
1
1
1
1
企业名:王春霞
类型:生产加工
电话: 0755-29582026
联系人:王春霞
地址:广东深圳宝安44区兴华一路金宝大厦8511室
一.电器性能规格 ELE*RICAL CHARA*ERISTICS | |
测试条件 Test Conditions |
|
在微小电流(100mA )以下测试 Measured at *all l current (100mA or less) 1000HZ |
|
输入500V电压1分钟,按以下方式测试:Apply a voltage of 250V DC for 1 min to following portions after mhich measurement shall be made: (1) 塑胶体与针脚之间 (1)Between body and conductor (2) 不接触的针脚之间 (2)Between conductor not to be contact |
|
输入AC500V(50-60HZ)电压,1分钟感应电流为0.5MA,按以下方法测试: AC 250V ims(50-60HZ) for 1 min trip current: 0.5 mA (1)塑胶体与排脚之间 (1)Between terminals (2)不接触的排脚之间: (2)Between individual terminals and frame |
|
-25℃---- 75℃ |
|
在没有指定的情况下测试温度,湿度,气压如下: Unless otherwise specified , the stardard range or atmospheric conditions for making measurements and tests are as follows (1) 温度为5℃--35℃ (1)Ambient temperature:5℃to 35℃ (2) 湿度为45%--85% (2)Relative humidity :45% to 85% (3) 气压为80KPA----106KPA (3)Air pressure : 80Kpa to 106Kpa |
|
二.机械性能规格 MECHANICAL CHARA*ERISTICS | |
|
|
在排脚前端任意一个方向的先端加上300克力力度测试,时间为15秒 A static load of 300gf shall be applied to the tip of the terminal for 15 sec in any direction |
|
负荷:在负荷的条件下以每分钟25-30回的频率进行100,000次的负荷测试; Aswitch shall be subjected to 100.000 cycles at a speed of 25-30 cycles for 1 min |
|
|
|
友情链接: 深圳市元东发电子有限公司