特点 Feature
*体积小,容量大,适合自动安装的卷(编)带包装。 Miniature size, large capacitance, tape and reel packaging suitable for auto-placement
*环氧树脂封装,从而具有优良的*潮性能、机械强度及耐热性。 Epoxy resin coating creates excellent performance in humidity resistance, mechanical strength and heat resistance
*工业生产标准尺寸及多种脚型产品。 Standard size, various lead configuration 介质种类 Dielectric T*e | I类介质 Cl* I | II类介质 Cl* II | 介质材料 Dielectric Material | 温度补偿型 Temperature Compensating | X7R/X5R(B) | Z5U(E) | Y5V(Y/F) | 电气性能 Electrical Properties | 电气性能*稳定,几乎不随温度、电压和时间的变化而变化。 The electrical properties is the most stable one and has little change with temperature, voltage and time. | 具有较高的介电常数,容量可做到比I类电容器高,具有稳定的温度特性。 X7R material has high dielectric constant, and its capacitance is higher than cl* I. These capacitors are cl*ified as having a semi-stable T.C.. | 温度特性介于X7R和Y5V之间,容量稳定性相对较差,对温度、电压等条件较敏感。 Temperature characteristic is between that of X7R and Y5V. The capacitance is unstable and sensible to temperature and voltage. | 介电常数*大,但温度特性较差,对温度、电压等条件较敏感。 Y5V material has highest dielectric constant. Its capacitance and dissipation is sensible to temperature and voltage. | 应用 Application | 适用于低损耗,稳定性要求高的高频电路,如滤波器、振动器和计时电路等。 Used in applications where low-losses and high-stability are required, such as filters, oscillators, and timing circuits so on. | 适用于容量范围广,稳定性要求不高的电路中,如隔直、耦合、旁路及鉴频等电路中。 Used over a wide temperature range , such in these kinds of circuits, DC-blocking, coupling, b**ing, frequency discriminating etc. | 适用于要求大容量,使用温度范围接近于室温的旁路、耦合等,及低直流偏压电路中。 Ideally suited for b**ing and coupling application circuits operating with low DC bias in the environment approaching to room temperature. | 适用于要求大容量,温度变化不大的电路中 Used over a moderate temperature range in application where high capacitance is required. | 容量范围 Available capacitance range | 0.5pF~0.1uF | 100pF~22uF | 1nF~10uF |
订货代码 Ordering Code *4 - 0805 Y 104 M 500 P F3 ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ A B C D E F G H
尺寸、工作电压及容量关系表 Size Code and Voltage VS Capacitance
• 其它规格可直接和我们联系。 • Others are available, Contact yuexing.
通用型引线MLCC*性及测试方法 Reliability and Test Method for General Leaded MLCC
以上所示“标准条件”解释如下: 温度:5~35℃, 湿度:45~85%, 气压:86~106kPa * Note on standard condition: " standard condition " referred to herein should be defined as follows: 5 to 35℃ of temperature, 45 to 75% of relative humidity, and 86 to 106kPa of atmospheric pressure. 若测试结果有争议时,仲裁试验用标准大气条件为: 温度:25&plu*n;1℃, 相对湿度:48%~52%, 气压:86~106kPa * When there are questions concerning measurement results: In order to provide correlation data, the test should be conducted under a condition of 25 degrees plus/minus 1 centigrade of temperature, 48% through 52% of relative humidity and 86 through 106 kPa of atmospheric pressure. 包装形式 Packaging Style
注意Note: P1=3.85mm for F=5.08mm;P1=5.1mm for F=2.54mm.
|