MIL-NLDCBS1X3

Technical Product Data

Features

·                   Excellent Gain Flatness

|L1 – L2| < 0.5dB

·                   Extremely Flat Group Delay

Less that 1ns variation

·                   Phase Matched Outputs

Phase (J1 – J2) < 1.0o

Description

The MIL-NLDCBS1X3 GPS Splitter is a one input, three output device.   The frequency response covers GPS L1, L2, L5, Galileo, and GLONASS bands with excellent gain flatness. The unit is completely MIL Qualified.  It will accept any DC voltage from 8-32 VDC which is regulated down to

5VDC to power the GPS Antenna. The 5 VDC is sent to the antenna via the center conductor on the

antenna port.  The RF outputs (J2, J3, and J4) are DC Blocked with a 200W load to simulate antenna current draw. J2 and J3 ports are TNC connectors and the J4 port is a type N Connector

Electrical Specifications, TA = 250C

Part Number

MIL  N      L DCB S1X3

MIL - Military Spec Qualified -------------------------

N - Networked – External Power supply input --------

L – Loaded – DC antenna Load on DC Blocked Ports------

DCB – DC Blocked ---------------------------------------------------------------

S1X3 – Splitter one input three outputs  -------------------------------

Performance

Input SWR: Ant. J2, J3, J4 -50W and Freq. Response: Ant. To J2, J3, J4

Opposite Port Isolation:

Dimensions:                  Height: 1.25”

Length (not including connectors) Body: 2.25”

Base Plate: 3.00” Width (not including connectors): 2.25”

Weight:                         9.8 oz. (272 grams)

Mil Qualifying Standards:

EMI:

MIL-STD 461/462

(EMI)

CE01, CE04, CS01, CS02, CS06, RE02, RS02, RS03 @ 200 Volts/Meter

from 14Khz to 40Ghz