多系列
Asun
企业名:东莞市安舜科技有限公司
类型:生产企业
电话: 0755-1234566
联系人:黄先生
邮箱:531209185@qq.com
地址:广东东莞广东东莞市塘厦镇科苑城沙坪路1A号二楼
∟ 模块电源/电源模块(3)∟ 开关电源(4)∟ 电源适配器(8)∟ LED( PDP、LCD)电源(5)
防水恒压电源:对电源的输入的电流以及电压控制在一个稳定的限制单元之内,并且不干扰输出的电压和输入电流。且具有较好的防水防潮功能!
电气规格Electrical Specification
2.1 AC输入AC Input
2.1.1输入电压Input Voltage
表格1:列举AC输入电压范围,在此电压范围内,电源应正常工作并符合所有电气性能要求。
Table 1: Lists the AC input operating voltage range. The power shall work normally and meet all electrical requirements throughout this range.
表格1:AC输入电压限值 Table 1: AC Input Voltage Limitations
值Minimum |
额定值Nominal |
值Maximum |
100Vac |
110Vac/220Vac |
240Vac |
2.1.2输入频率Input Frequency
表格2:列举AC输入频率范围,在此频率范围内,电源应正常工作并符合所有电气性能要求。
Table 2: List the AC input operating frequency range. The power shall work normally and meet all electrical requirements throughout this range.
Table 2: AC Input Frequency Limitations AC输入频率限值
值Minimum |
额定值Nominal |
值Maximum |
47Hz |
50Hz/60Hz |
63Hz |
2.1.3冲击电流Inrush Current
冲击电流峰值在额定电压输入,冷启动(25℃)时,不大于80A;且在任何负载和输入条件下,不导致性损坏或危险,输入电压的定义见表格1.
Peak inrush current shall be limited to 80A of rated input voltage and cold start at 25 degrees C, and shall not result in a permanent damage of the power supply under any conditions of load and input voltage as specified at any input voltage as specified in table 1.
2.1.4待机功耗Standby Input Power
在额定电压输入情况下,待机功耗不大于0.5W。
The standby input power should no more than 0.5W under the rated input voltage condition.
2.1.5输入电流Input Current Limiting
在输入电压值,负载为满载条件下,输入电流不大于1.5A。
详细的产品信息请致电厂家电话确认!
秉承:“科技为先, 质量为本, 用户第一, 服务至上”的经营理念, 以优质的产品、精湛的工艺、弹性灵活的行销理念、诚信待人的企业文化, 周到全面的售后服务, 与合作伙伴共成长为使命,不断提高产品的档次和满足用户需求。
友情链接: 深圳市元东发电子有限公司