Type MV Low Resistance Power Film Resistors
Values from 0.1 ohm to 50 ohms with Exclusive Non-Inductive Design
Model
No.
Wattage
Oper.
Temp.
(Max.)
Dielect.
Strength Min. Max. A B C
Leadwire
Resistance Dimensions in inches and (millimeters)
MV217 1.5 275°C 800 0.20 Ω 50 Ω
  .400 ±.060
(10.16 ±1.52)
  .140 ±.030
(3.56 ±.76)
.025 ±.002
(.64 ±.05)
Solderable
MV228 2.0 275°C 1,000 0.10 Ω 50 Ω
  .480 ±.060
(12.19 ±1.52)
  .230 ±.030
(5.84 ±.76)
  .040 ±.002
(1.02 ±.05)
MV234 3.0 275°C 1,000 0.10 Ω 50 Ω
  .570 ±.060
(14.48 ±1.52)
  .300 ±.030
(7.62 ±.76)
  .040 ±.002
(1.02 ±.05)
MV261 6.0 275°C 1,000 0.10 Ω 50 Ω
  .910 ±.060
(23.11 ±1.52)
  .350 ±.040
(8.89 ±.76)
  .040 ±.002
(1.02 ±.05)
MV311 10.0 275°C 1,000 0.10 Ω 50 Ω
2.000 ±.080
(50.80 ±2.03)
.350 ±.040
(8.89 ±1.02)
  .040 ±.002
(1.02 ±.05)
Solderable
Solderable
Solderable
Solderable
Specifications:
Resistance Tolerance:  ±1% (5% and 10% are 
also available).
Temperature Coefficient:   5 ohms and above, 
±100 ppm/°C, referenced to +25°C, ∆R taken at
-15°C and +105°C.
Below 5 ohms, ±(200 ppm + 0.00002 ohm)/°C, 
referenced to +25°C,  ∆R taken at -15°C and 
+105°C.
Insulation Resistance:  10,000 Megohms, min.
Momentary Overload:   5 times rated power for 
5 seconds, ∆R ±(1 percent + 0.001 ohm) max.
Thermal Shock:  Mil-Std-202, Method 107, Cond. 
C, ∆R ±(1 percent + 0.001 ohm) max.
Moisture Resistance:   Mil-Std-202, Method 106, 
∆R ±(1 percent + 0.001 ohm) max.
Load Life:   1,000 hours at +25°C at rated 
power, ∆R ±(1 percent + 0.001 ohm) max.
Encapsulation:  High Temperature Silicone 
Conformal.
Measurement Note:  For these specifications, 
resistance measurement shall be made at a 
point 0.3 inch (7.62 mm) from the resistor body.
MV261
MV228
MV311
MV217
MV234
   Type MV Low Resistance Power Film Resistors combine Caddock's 
Exclusive Non-Inductive Design with many high performance capabilities of 
Micronox® resistance films to achieve these special advantages:
•  Low Resistance - from 0.1 ohm to 50 ohms.
• Maximum Operating Temperature up to +275°C.
• Five Sizes and Power Ratings.
• Full Power Ratings without derating for Non-Inductive Performance.
• See MP900 Series Power Resistor Products for Resistances as Low as 0.005Ω.
The interdigitated terminations in the Type MV resistors provide a multiplepath distribution of the current into parallel resistance sections, which provides 
low resistance values and non-inductive performance.  This Exclusive NonInductive Design provides significant performance improvements in high speed 
or inductance sensitive electronic circuits, including high performance power 
amplifiers, high-speed data transmission systems, high frequency video 
amplifiers, current switching circuits, and current sensing circuits.
MV
Exclusive
Non-Inductive
Design
1.500 ± .125
(38.10 ± 3.18)
A B
C
RATED LOAD, %
AMBIENT TEMPERATURE, °C
100
80
60
40
20
0

DIMENSIONS IN INCHES AND (MILLIMETERS)
Derating
Curve:
MV234 - 0.10 - 1%
Model Number:
Resistor Value:
Tolerance
Ordering  Information:

企业名：西安尚平电子科技有限公司

类型：其他

电话： 029-81777783

手机：18092826768

联系人：马女士

QQ：

邮箱：xacomponents@163.com

地址：陕西西安长安南路449号