本公司是日本北阳，HOKUYO，华东代理商，质量上乘，业界公认！
可根据用户要求开17%增值税发票，欢迎来电洽谈！

• 特点

  • 可见激光射线
  • 高速应答时间, 60µs(快速模式)
  • 3 kinds of beam can be chosen(Spot, area, line)
  • IP67 for sensor head
  • Sensitivity correcting function is provided
  • Coaxial-reflection type is also lined-up

  应用

  Warp detection(Through-beam type)	Transparent detection(Coaxial retro-reflection type)
  Height/width detection(Through-beam, length measurement type)	Uneven goods detection(Coaxial retro-reflection type, long distance)
  Tip work detection(Coaxial reflection type)

  
  

  模式

  教学模式

  1点 teaching It can set not to detect back-ground by teaching under no object.
  Two-point teaching It sets the threshold at the center between 2 points teaching(object and no object).
  Auto teaching It can set the sensitivity automatically.(it can be set even if the object is moving)
  Teaching length measurement It can distinguish the width(length) of object in the specific area. If it would be over 10%, output 1 is executed and if over -10%, output 2 is executed.
  Teaching transparent object This mode is to detect the transparent object with retro-reflection type head.(Glass or plastic film etc.) It can detect the object with a little variation of light-receiving amount such as transparent objects by making a one- point teaching under no objects.
  Zone teaching It can detect within the area between upper and lower limit. It can set during ±10% of light-receiving amount. It can set without influence of background.

  注意

  This product is emitting visible laser beam and is classified as Class 2 by JIS C6802/IEC Laser Safety standard. When exporting to USA, US laser control, FDA(Food and Drug Administration) is applied. Please ask us in details.
  透过型	透过型, 长度测量型
  Coaxial retro-reflection type, Coaxial retro-reflection type, long distance, Coaxial reflection type

  规格

  Sensor head

  Kind	Through-beam	Length measurement	Coaxial retro-reflection	Coaxial retro-reflection(long type)	Coaxial reflection
  Model No.	JDA-15K5 Projector : JDA-15K5P Receiver : JDA-15K5R	JDA-15K5-W Projector : JDA-15K-WP Receiver : JDA-15K5-WR	HDA-70K3	HDA-350K3	HDA-08K1
  Optical system		Coaxial reflection
  Light source	Red semiconductor laser 650nm
  Laser class	JIS/IEC Class 1	JIS/IEC Class 2
  Max. power	390µW	3mW
  Laser life	Approx. 45,000 hours(at 55 degrees C)
  Detecting distance	Long	1.5m	1.5m(0.5m when measuring mode*1)	0.08m to 7m*2	0.5m to 35m*2	0.8m*3
  Standard	0.05m to 4m*2	0.3m to 25m*2	0.6m*3
  Fast	0.02m to 2m*2	0.1m to 14m*2	0.2m*3
  Spot diameter	2mm (at 1.5m)	30×2.5mm (at 1.5m)	9mm (at 7m)*4	45mm (at 35m)	1.3mm (at 0.8m)
  Repeatability	0.2mm	0.3mm	0.2mm	0.2mm	0.2mm
  Indicators	Laser emitting lamp(only projector) :green LED, Output lamp(only receiver) :orange LED	Laser emitting lamp : green LED, Output lamp : orange LED
  Connection	Connector type
  Ambient illuminance	Incandescent lamp : 3,000lx or less, sun light : 10,000lx
  Ambient temperature/humidity	-10 to 55 degrees C(-20 to 60 degrees C when stored), 35 to 85%RH(35 to 95%RH when stored), not icing and condensing
  Vibration resistance	Double amplitude 1.5mm, 10 to 55Hz, each 2 hour for X, Y and Z direction
  Impact resistance	500m/s2, each 3 time for X, Y and Z direction
  Withstand voltage	1,000VAC/min.
  Insulation resistance	20MΩ or more(500VDC)
  Protective structure	IP67(IEC standard)
  Case material	Body : Polycarbonate, window : glass, PMMA resin
  Weight	90g	115g	45g
  Accessory		Reflector(RRL-23S)	Reflector(RRL-51S)

  *1 Response time at length measurement mode should be set to Long mode or Standard mode.
  *2 This value is used with attached reflector.
  *3 This value is used with 200mm^□white paper.
  *4 Spot diameter can be changed by using the attachment.

  
  Amplifier

  Model No.	LDA-DC	LDA-DA
  Power source	12 to 24VDC ±10%
  Current consumption	45mA when 24VDC(including sensor head, excluding analog)
  Response speed (sensing mode)	60µsec/500µsec/2msec(Fast/Standard/Long by sensing mode)
  Output	NPN open-collector	PNP open-collector
  Control output	100mA 24VDC or less, residual voltage 1.8V or less
  Indicators	Laser emitting lamp : green LED, Output lamp : orange LED, Teaching lamp : red LED, Channel lamp : green(1/2CH)
  Digital display	7-segment LED, 8 digits
  Timer function	On-delay/Off-delay/One-shot
  Timer	1ms to 9s
  Teaching	One-point, two-points, zone, transparent object, length measurement
  Operating mode	Light-ON/Dark-ON changeover
  Analog output	4 to 20mA
  Input/output setting	External input setting : one-point teaching, synchronous input, Projection-off, counter-reset,output setting : 2CH output alarm setting
  Zero-reset	Provided
  Initial reset	Provided(return to initial setting)
  Connection	Cable type(2m long)
  Insulation resistance	20MΩ or more(500VDC)
  Withstand voltage	1,000VAC/min.
  Ambient temperature/humidity	-25 to 55 degrees C(-20 to 60 degrees C when stored), 35 to 85%RH(35 to 95%RH when stored), not icing and condensing
  Vibration resistance	Double amplitude 1.5mm, 10 to 55Hz, each 2 hour for X, Y and Z direction
  Impact resistance	500m/s2, each 3 time for X, Y and Z direction
  Protective structure	IP50(IEC standard)
  Case material	Polycarbonate
  Weight	Approx. 65g(including cable)
  Accessory	Fitting metal
  Mounting	DIN-rail mounting

  External dimension

  Sensor head

  Through-beam type

  Through-beam length measurement type

  Coaxial retro-reflection type, Coaxial retro-reflection type, long distance, Coaxial reflection type

  Amplifier

  Reflector

  RRL-23S(RRRL001)

  RRL-51S(RRRL002)

  Output circuit

  NPN output

  

  PNP output

  
  
  

  PAGE TOP

企业名：上海中韦实业发展有限公司

类型：生产企业

电话： 86 021 69116748,69117740

手机：15900818299

联系人：季传飞

地址：上海上海中国上海上海市嘉定区江桥镇靖远路621弄26号401