本公司是日本北阳，HOKUYO，华东代理商，质量上乘，业界公认！
可根据用户要求开17%增值税发票，欢迎来电洽谈！

特点

• 规格

  类型	并列型
  16-bit型
  型号	DMH-GC1	DMH-HC1
  传输容量(I/O)	16BIT/16BIT
  方向	HEAD-ON	SIDE-ON
  传输距离	0 to 3m(可由调节器调节)
  指向角	±13°
  传输方式	半双工双向传输
  传输时间	15ms
  调制方式	FSK调制
  检测方式	Bit-reverse comparison system
  电源	DC18 - 30V(波动≤10%)
  消耗电流	≤150mA
  环境照度	≤10,000lux
  环境温湿度	-10 to 50 degrees C, ≤85%RH
  抗振性能	双振幅 1.5mm, 10 - 55Hz, X, Y 和 Z 方向各2小时
  抗冲击性能	500m/s2, X, Y 和 Z 方向各10次
  连接	Lead wire (0.2mm2, 40 cores, shield cable 2m long)
  防护结构	IP64(IEC标准)
  重量	约400g(包括2m长连线)

  D-sub 接头型和长距离型(15m) are lined-up.

  外部尺寸

  DMH-GC1(HEAD-ON型)

  

  DMH-HC1(SIDE-ON型)

  

  * Mode切换开关 : If one is set to T side(transmission priority mode), other one have to be set to R side(reception priority mode).

   

  输入/输出电路

  输入

  

  Flow current when ON(IO) : approx. 5mA(when 24VDC)
  ON voltage : 2V or less, OFF voltage : 8V or more

  输出

  

  NPN open-collector output
  35DC 50mA residual voltage 0.9V or less

  连接

  Connector (1) 12Pin (JAE IL-S-12S) Connector (2) 10Pin (JAE IL-S-10S) Connector (3) 15Pin (JAE IL-S-15S)

  
  

  接头 (1) 颜色 Pin No. 功能 Pink(red 1) 1 Power V Pink(red 2) 2 Power -V(COM) Pink(red 3) 3 OUT16 Pink(red 4) 4 IN16 Pink(black 1) 5 OUT15 Pink(black 2) 6 IN15 Pink(black 3) 7 OUT14 Pink(black 4) 8 IN14 White(red 1) 9 OUT13 White(red 2) 10 IN13 White(red 3) 11 OUT12 White(red 4) 12 IN12

  接头 (2) 颜色 Pin No. 功能 White(Black 1) 1 OUT11 White(Black 2) 2 IN11 White(Black 3) 3 OUT10 Gray(red 1) 4 IN10 Gray(red 2) 5 IN9 Gray(red 3) 6 OUT9 Gray(red 4) 7 IN8 Gray(black 1) 8 OUT8 Gray(black 2) 9 IN7 Gray(black 3) 10 OUT7

   

  接头 (3)
  颜色	Pin No.	功能
  Orange(red 1)	1	IN6
  Orange(red 2)	2	OUT6
  Orange(red 3)	3	IN5
  Orange(red 4)	4	OUT5
  Orange(black 1)	5	IN4
  Orange(black 2)	6	OUT4
  Orange(black 3)	7	IN3
  Orange(black 4)	8	OUT3
  Yellow(red 1)	9	IN2
  Yellow(red 2)	10	OUT2
  Yellow(red 3)	11	IN1
  Yellow(red 4)	12	OUT1
  Yellow(black 1)	13	SELECT*1
  Yellow(black 2)	14	GO*2
  Yellow(black 3)	15	STROBE*3

  Note) Don't use White(black4), gray(black4) and Yellow(black4). If cable is cut on the way, cut it at the base.

  Note) Don't use the connector attached to the cables as connecting terminal.

  *1 SELECT 输入
  This is to stop transmission/reception optionally by outer signal
  *Operating by opened between select and I/O COM
  *Stopping by short-circuited between select and I/O COM

  *2 GO 输出
  This is to check correct optical single
  *ON when receiving correct optical axis
  *OFF when interrupting optical axis(Not-receiving)

  *3 STROBE
  ON when data is fixed.

企业名：上海中韦实业发展有限公司

类型：生产企业

电话： 86 021 69116748,69117740

手机：15900818299

联系人：季传飞

地址：上海上海中国上海上海市嘉定区江桥镇靖远路621弄26号401