|
|
|
Visionpro PC Vision Systems |
|
MVS-8100L |
File Download Link |
|
|
PC Requirements |
166Mhz Pentium cl* CPU or Greater
（MMX required for PatMax software） |
|
|
AGP-based video display adaptor with at least 8* of RAM, support for Direct Draw, and operating in a minimum 256 color mode |
|
|
One open +5V/32-bit PCI expansion slot
|
|
|
Optional: Microsoft VB.NET, Visual C++.NET(UNMANAGED),or C# |
|
Memory |
Line buffer |
|
|
Video Input |
Up to four multiplexed RS-170 or CCIR cameras |
|
|
Full or half resolution acquisition |
|
|
Supports external camera sync |
|
|
Parallel I/O |
High-speed opto-isolated trigger input |
|
|
Strobe output |
|
|
Opto-isolated accept/reject output
|
|
|
|
|
MVS-8501 |
File Download Link |
|
|
PC Requirements
|
166Mhz Pentium cl* CPU or Greater
（MMX required for PatMax software） |
|
|
An AGP-based video display adaptor with at least 8* of RAM |
|
|
Direct Draw, and operating in a minimum 256 color mode. AGP is preferred. |
|
|
One open +5V/32-bit PCI expansion slot |
|
|
Optional: Microsoft VB.NET, Visual C++.NET(UNMANAGED),or C# |
|
|
Memory |
8* FIFO |
|
|
Video Input
|
Up to four multiplexed *og cameras |
|
|
Supports standard and high-speed *og |
|
|
Supports high resolution，rapid reset，progressive scan，and interlaced cameras |
|
|
Selectable anti-aliasing filter for high image quality |
|
|
Parallel I/O |
16 bi-directional TTL I/O |
|
|
One line can be configured as trigger input |
|
|
One line can be configured as trigger output |
|
|
Opto-isolation available via a breakout box |
|
|
|
|
MVS-8504 |
File Download Link |
|
|
PC Requirements
|
166Mhz Pentium cl* CPU or Greater
（MMX required for PatMax software） |
|
|
An AGP-based video display adaptor with at least 8* of RAM |
|
|
Direct Draw, and operating in a minimum 256 color mode. AGP is preferred. |
|
|
One open +5V/32-bit PCI expansion slot |
|
|
Optional: Microsoft VB.NET, Visual C++.NET(UNMANAGED),or C# |
|
|
Memory |
16* frame buffer |
|
|
Video Input |
Four independent standard and high-speed *og channels，with mixed camera formats |
|
|
Supports high resolution，rapid reset，progressive scan，and interlaced cameras |
|
|
Supports grayscale |
|
|
Parallel I/O |
16 bi-directional TTL I/O |
|
|
Four line can be configured as trigger input |
|
|
Four line can be configured as trigger output |
|
|
Opto-isolation available via a breakout box |
|
|
|
|
IEEE1394 DCAM(FireWire) |
File Download Link |
|
|
PC Requirements
|
166Mhz Pentium cl* CPU or Greater
（MMX required for PatMax software） |
|
|
PCI-or AGP-based video display adaptor with at least 8* of RAM，support for Direct Draw，and operating in a minimum 256 color mode，AGP is preferred. |
|
|
One open +5V/3.3V PCI expansion slot |
|
|
Optional: Microsoft VB.NET, Visual C++.NET(UNMANAGED),or C# |
|
Memory |
N/A |
|
|
Video Input |
Supports IEEE 1394a and IEEE 1394b (FireWire) camera using DCAM 1.3or later |
|
|
Up to three (3) cameras can be connected directly to the interface card. FireWire hubs are supported to enable additional cameras |
|
|
Supports resolutions from 640X480 up to 2KX2K |
|
|
Supports both color and monochrome cameras |
|
|
Parallel I/O |
Optional I/O kit provides: |
|
|
24 lines of di*al TTL I/O |
|
|
Two banks of 8，two banks of 4，each bank programmable as input or output |
|
Eight lines of opto-isolation available via breakout panel |
|
|
|
MVS-8601 |
File Download Link |
|
|
PC Requirements
|
166Mhz Pentium cl* CPU or Greater
（MMX required for PatMax software） |
|
|
An AGP-based video display adaptor with at least 8* of RAM |
|
|
Direct Draw, and operating in a minimum 256 color mode. AGP is preferred. |
|
|
One open +5V/32-bit PCI expansion slot |
|
|
Optional: Microsoft VB.NET, Visual C++.NET(UNMANAGED),or C# |
|
|
Memory |
48*FIFO |
|
|
Video Input |
Supports 1 Base Camera , Link camera at rates up to 66MHz per input |
|
|
Parallel I/O |
8 inputs，8 output，all opto-isolated |
|
|
1 trigger line，1 strobe line |
|
|
1x2-phase encoder inputs |
|
|
|
|
MVS-8602 |
File Download Link |
|
|
PC Requirements
|
166Mhz Pentium cl* CPU or Greater
（MMX required for PatMax software） |
|
|
An AGP-based video display adaptor with at least 8* of RAM |
|
|
Direct Draw, and operating in a minimum 256 color mode. AGP is preferred. |
|
|
One open +5V/32-bit PCI expansion slot |
|
Optional: Microsoft VB.NET, Visual C++.NET(UNMANAGED),or C# |
|
Memory |
48*FIFO |
|
|
Video Input |
Supports 2 Base Camera Link cameras at rates up to 66MHz per input |
|
|
Parallel I/O |
8 inputs，8 output，all opto-isolated |
|
|
2 trigger line，2 strobe line |
|
|
2x2-phase encoder inputs |
|
|
|
