DAIN安规电容100元/KPCS

品牌/商标：
DAIN
型号/规格：
125K/275VAC P=22.5MM
介质材料：
*薄膜
应用范围：
滤波
外形：
方块状
调节方式：
固定
引线类型：
同向引出线
允许偏差：
&plu*n;10（%）
等效串联电阻(*R)：
/（mΩ）
标称容量：
1.08-1.32（uF）
损耗：
/
额定电压：
275（V）

发布询价信息

相关产品

普通会员

企业名：东莞市科尼盛电子有限公司

类型：生产企业

电话： 0769-82802469

手机：13662958961

联系人：薛强

QQ：

邮箱：13437429682@163.com

地址：广东东莞东莞市东坑镇骏达路64#

产品分类

电容器(694)
∟ 铝电解电容(7)∟ 安规电容(1)∟ 超级(法拉/黄金)电容(8)∟ 瓷片(瓷介)电容(37)∟ 陶瓷电容(36)∟ 独石(层积)电容(37)∟ 涤纶电容(1)∟ 玻璃釉电容(4)∟ 纸膜复合电容(纸介)电容(1)∟ 其他电容(416)
电位器(1)
电源/稳压器(1)
∟ 工业设备电源(1)
压电陶瓷元件(2)
∟ 陶瓷滤波器(2)
连接器/接插件(5)
∟ 其他连接器(5)
传感器(1)
∟ 振动/接近/位移传感器(1)
LED(1)
∟ LED器件(1)
电子材料(2)
∟ 电子磁性材料(2)

新品上架

商品信息

APPLICATION FOR APPROVAL
1.Item: Metallized Pol*ropylene Capacitor
2.T*e: MPX Series.
3.Specification.
a.Temperature Range -40°C ~ 110°C
b.Capacitance. 0.001uF~1.0uF
c.Capacitance Tolerance. K(&plun;10%)M(&plun;20%)
d.R.V. 275VAC
e.Dimension. Refer to standard product list (Attached Pages).
4.Performance Test
ARTICLE	APPLICATION	PERFORMANCE	T*T METHOD
1	Appearance	No defect	Eye measurement or by
			dial gauge
		(Between terminals)	Add a D.C.test Voltage
		No defect,Self healable breakdown	of 1200 V rated W.V for
		is not counted	60 sec
2	Dielectric strength		The initial changing and
			discharging currents at
			testing voltage shall not
			exceed 1A
		Between body and terminal	Add a D.C.test Voltage
		no defect	of 1200V rated W.V.for
			60sec
			Test voltage:
		C≤0.33uF :15000MΩMIN
			275VAC for rated voltage 275VAC
	Insulation	C〉0.33uF :5000MΩ.uf MIN
3	Resistance




4	Capacitance	Within the Specification.	Measured with frequency
5	Dissipation Factor	The tangent of loss amgle:≤0.1%	1KHZ and 25°C











APPLICATION FOR APPROVAL
ARTICLE	APPLICATION	PERFORMANCE	T*T METHOD
6	Tensile strength	1)No visible damage	Tensile strength:load:1.0kg.
		2)No breaking or looseing of	Duration of load application:
		terminal	60&plu*n;5sec.
			Bending strength:load:0.5kg.
			The number of testing time:twice
		1)No open and short circuit	Variable frequency cycle:
7	Vibration	happened .	10~55~10Hz/min
		2)No damage in element junction	Amplitude 1.5 mm;Direction
		and appearance	x,y,z;each direction 2 hours.
		At least 75% of the circumference	Solder temperature:245&plu*n;5℃
8	Solderability	of the immersed shall be covered	Dipping time:2&plu*n;0.5 sec
		with new solder.	Dipping depth:2&plu*n;0.8mm from
			the root of the terminal.
		1)No visible damage;	In 260&plu*n;5°C solder bath
9	Resistance to	2)Capacitance change:within &plu*n;5%	for 5 sec
	solding heat	of initial value.
		1)Capacitance change:ΔC/C≤5%;	Test in constant thermostatic
10	Heat resistance	2)The tangent of loss angle:	oven after 2 hours deposit
		changed within 150% of initial	reached temperatureequilibrum
		value at 1Khz	85&plu*n;2℃thermostatic oven.
		3)IR≥30% of initial value
		1)Capacitance change:ΔC/C≤5%;	Test in constant thermostatic
11	Cold resistance	2)The tangent of loss angle:	after 2 hours deposit
		changed within 150% of initial	reached temperature equilibrum
		value at 1Khz	-40&plu*n;2℃thermostatic oven.
		1）Appearance: no defect;	Temp.:40°C;
12	Moisture resistance	2）Test voltage:No defect,self	Humidity:R.H 90%-95%
		healable ability is not destoryed;	Add W.V for 240&plu*n;8 hours
		3）Insulation resistance:≥30% of	then keep the room temp.
		initial value;	10 hours.
		4）The tangent of loss angle:change
		within 150% of initial value;
		5）Cap,change:ΔC/C≤5%
		1)Appearance:no defect;	Add 140% of W.V.
13	Moisture	2)Insulation resistance:≥50%	85&plu*n;3°C in Chamber for
	resistance	of initial value;	then keep .Under standerd
	loading	3)The tangent of loss angle:	1000H condition 2 hours.
		4)change within 150% of initial
		value;Cap,change:ΔC/C≤5%