2.薄膜开关，薄膜面板，柔性电路，导电膜，PVC标牌标贴，塑料面板

我公司选用中外*的原材料制作。如：柯图泰、拜耳、GE薄膜、日东、3M双面胶、精工、IPI、宝龙油墨、杜邦插座等等。

>Product Information

Functions:

Descripition:

A.3-D Hand/Feel Membrane Switch 1.Features: Raised 3-D sense of the surface keystroke on the panel, built-in metal dome or plastic dome and touch sense while pressing the keystroke. 2.Applied Scope: Switch keystroke of all microelectronic controller. 3.Technical Parameters: Service life longer than 500,000 times, maximum working current being 10VCD100MA and operating force being 250-550G. 4.Remarks: The raised on the surface of the keystroke can be made as per customer requirements. B.Plane Light-touch Membrane Switch 1.Product Features: Long service life, no sense while pressing the switch and *all operating force. 2.Technical Parameters: Service life longer than 1,000,000 times, maximum working current being 10VDC100MA and operating force being 30-150G. 3.Applied Scope: Switch keystroke of all microelectronic controller. 4.Remarks: Operating force can be adjusted as per customer requirements. C.LED Illuminated Membrane Switch 1.Product Features: Built-in LED indicating illuminating tube makes processing and design of your product easier and more convenient. 2.Technical Parameters: Maximum working current being 6VDC100MA and switch thickness being 0.8-2.5MM. 3.Applied Scope: Switch keystroke of all microelectronic controller. D.EL Noctilucent Membrane Switch 1.Product Features: Built-in large area of EL noctilucent sheet, which makes it quite easy to press the keystroke at dark night. 2.Technical Parameters: Working voltage being 30-250VAC, service life longer than 10000HRZ and working temperature being -40¡æ---60¡æ. 3.Applied Scope: Various electronic products used when there is no enough light. E. High-performance Waterproof Membrane Switch£º 1.Product Features: High-performance waterproof material adopted makes the product be used in 95% of damp environment. 2.Technical Parameters: The performance is the same with that of common membrane switch. 3.Applied Scope: Electronic products used in damp environment, such as electronic switch in steam sauna room and bathroom.

Soft circuit introduction is a kind of multi-layer plane circuit panel which is made up of spring conducting material and insulating material. It can be separated into silver paste circuit, carbon paste circuit and combined circuit of the two.　　
Membrane circuit can form membrane switch with membrane panel and can also be used as single circuit layer.
Technical Parameters:
Switch Power<1W Loop Impedance<100Ω Working Voltage<42VCD/25VAC
Working Environmental Temperature: -40℃--+50℃ Working Current<100MA Keystroke Force:1-5N
Insulating Impedance:≥100MΩ Lead/Wire Width 1.27mm, 0.5Ω/cm Relative Temperature: 40
Service Life Sensed Keystroke≥200,000times Senseless Keystroke≥1,000,000times
Max. Mechanical Load Capacity: Give 100N of operating force in switch center of the keyboard for 60±5s. Then the loop impedance is 100M and insulting impedance is 100M.
Touch Instability time: Jitter time is shorter than 5ms in the moment when contact point of the switch is turned on or off.
Voltage Resistance: Voltage resistance between bordering leads on the down-lead band or between turned-off contact points should be no lower than 250VAC and the time period is 1min.
Center-distance between bordering leads on the down-lead band is often 2.54mm.
Using Requirement: The article on which the circuit is to be fixed should have flat surface and no rust and the circuit can be fixed only after the article is cleaned by alcohol or gasoline.
Transportation: Membrane switches packaged into bags can be transported with any kind of transporting tools when exempt being poured by rain and snow.
Storage: Membrane switches packaged into bags should be stored with the temperature being -15℃-35℃, relative humidity not higher than 80% and no acid, alkali or other caustic articles in the surrounding air.

Product Information

Functions:

Descripition:

Membrane panel is a kind of decorating panel which is made of spring membrane and has some functional characters to indicate. Material of the membrane panel mainly uses PC, PET and PVC (most time unused). Printing technic includes obverse and reversed printing, which are used respectively for membrane panel of different material and t*es. Membrane panel can be separated into dish press and plane. 1.The dish press is mostly membrane switch design. Shapes of the dish press include words and signs raised in the center (words, picture or keystroke), spherical rise (including frame linear rise and linear rise), pot shape and edge rise (linear rise). 2.The plane has no dish press. It can be used as senseless keystroke membrane of membrane switch or only as a kind of decorating, indicating and instructing label. The membrane has sand surface, glossy surface and combined t*e of the two kinds.　　 Sand surface is mostly made through printing on sand-surface material, which has much hand feel, is nice and common. Glossy surface is made through printing on glossy material and it is quite shiny. The combined t*e between the sand surface and the glossy surface has not only sand effect but also shiny effect on the membrane surface. The main manufacturing technic is to print sand oil on the obverse surface of the glossy material to make it have sand effect.