KFD2-EB2.R4A.B *福（P F）
| 产品阐述 | ||
| redundant supply | ||
| Supply | ||
| Connection | terminals 11 , 12- terminals 8 , 9- | |
| Rated voltage | 20 ... 30 V DC The maximum rated operational voltage of the devices plugged onto the Power Rail must not be exceeded. | |
| Power loss | ≤ 2.4 W | |
| Output | ||
| Power Rail feed | Output current: max. 4 A | |
| Fault signal | relay output: * | |
| Contact loading | 40 V DC ; 2 A | |
| Energized/De-energized delay | approx. 20 ms / approx. 20 ms | |
| Fusing | 5 AT | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2004/108/EC | EN 61326-1:2006 | |
| Conformity | ||
| Insulation coordination | IEC 62103 | |
| Electromagnetic compatibility | NE 21 | |
| Protection degree | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) | |
| Mechanical specifications | ||
| Protection degree | IP20 | |
| M* | approx. 100 g | |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 in) , housing t*e B2 | |
| Data for application in connection with Ex-areas | ||
| Statement of conformity | TÜV 00 ATEX 1618 X | |
| Group, category, t*e of protection, temperature cl*ification | ||
| Directive conformity | ||
| Directive 94/9/EC | EN 60079-0:2006 , EN 60079-15:2005 | |
| International approvals | ||
| FM approval | ||
| Control drawing | 116-0160 | |
| Approved for | Cl* I, Division 2, Groups A, B, C, D; Cl* I, Zone 2, IIC | |
| CSA approval | ||
| Control drawing | 116-0160 | |
| Approved for | Cl* I, Division 2, Groups A, B, C, D; Cl* I, Zone 2, IIC | |
友情链接： 深圳市元东发电子有限公司
