TP-DK3系列机床控制变压器

概述

TP-DK3系列机床控制变压器适用于交流50-60HZ,一般输入额定电压不*过660V，输出额定电压不*过230V的电路中，作为各行各业的各类机床、机械设备等一般电器的控制电源、局部照明和信号灯的电源之用，是其它控制变压器更新换代的产品，采用*材料和*工艺进行制造，具有变压器体积小、损耗低，工作*，接线*，适用性广等特点，产品*合GB5226，*/T5555-2001，VDE0550-1-3，EN61558-1:1997，EN61558-2-13:2000等有关*、国际标准，并荣获欧共体"CE"，证书编号：LVD100607-01，可与国外产品互换使用。

TP-DK3系列机床控制变压器技术特性

初级次级绕组分开绕制，当次级只有一个绕组时，它担负变压器的*额定容量，次级如兼有控制、照明及指示灯绕组时，则按各绕组容量分配分别绕制，对单绕组且有中间抽头的变压器其各中间抽头容量，皆小于变压器的额定容量，只有*高电压输出端可担负额定容量。

TP-DK3 Machine Tool Control Transformer

Application:

TP-DK3 series transformers are used in the 50-60HZ accircuit of input voltage less than 660V and output voltage less than 230V as machine equipment in various area for controlling the power of electrical equipment , lighting and Signal lamp.
This series transformer is favorable and used widely as *all size, low loss and reliable function and Safety wire connection. It conforms to GB5226，*/T5555-201，VDE0550-1-3，EN61558-1:1997，EN61558-2-13:2000and gets CE approval. Verification Number:LVD100607-01.

TP-DK3 series engine bed control transformer technology characteristic

primary secondary circles the system separately, when secondary when a winding, it shoulders the transformer completely the rated capacity, when secondary like has at the same time the control, the illumination and the indicating lamp winding, presses various windings capacity *ignment to circle the system separately, to simplex winding, and has intermediate tap's transformer its each intermediate tap capacity, is *aller than transformer's rated capacity, only then the overvoltage out-port may shoulder the rated capacity.