CF to IDEAdapter User ‘s Manual

Brife

Compter- flash(cf)card is a moverable electronic soild-state-dilsh(SSD)with IDE interface .it’s *all card with m* space.we have developed CF to IDE convrerter for your convenence.you can read CF card on IDE port

CF card is low cost.It is widely used in notebook PDA,protable instrument ,or other industrail device .in electronic factory,pople use CF card as hard-dish driver(HDD) to store test program ,because of turning on/off prower freqently will damage mechanical HDD

Characteristic

Accord with:CF spec Ver 2.0 and IDE/ATA-33 spec

Standard IDE interface: true-IDE mode,support DMA-33 transfer mode .

Support CF-1 and-2: alsosuport IBM mico-driver with CF-2 interface

DE 40PIN/2.54mm or 44PIN/2.0mm female or male connter:plug card into IDE socket directly or connect to motherboard by a cable

CF socket mounted flexible :different CF socket can be mounted ,single/double side selectable for double-side t*e

Master/Save jumper : CF card on each side can be configured as MASTER or SL*E

Use CF as DOM: supply auto select from IDE40 pin -20 or FDD power connector ,or from IDE when use IDE 44.

Main purpse

Compter peripheral device factory use it to test mainbord , audio card display card ,etc .In these case need power on/power off frequently,the mechanical HDD will be damaged easily CF card is an electronic HDD and nor the same princple ,will not be damaged under these case.

Protable instrument with X86 or RISC core momally have IDE interface, if the CF card can nor connect to it directly ,you can use this converter to do that .

Personal compter(PC): these compters with X86 cire ,these is the main purpose .some di*al camera have CF card interface ,you can use this converter to *ess your photograph date on your desk* compter,

Industrial PC use this conver and CF card to store embedded operating system (OS) such as LINUX or WINCE ,Also in industrail PC you can store date on CF card and thus makes date moveable .

Master/Slave setting jumpers

Jumper normally has a *all white triangle beside pin-1,or has a “1”beside pin-1 ,Each jumper has a cap. For double-side t*e (jumper has 3 pin ).