The GL823K is a USB 2.0 Single-LUN card reader controller which can support SD/MMC/MSPRO Flash 

Memory Cards. It supports USB 2.0 high-speed transmission to Secure DigitalTM (SD), SDHC, SDXC, 

miniSDTM, microSDTM(T-Flash), MultiMediaCardTM (MMC), RS MultiMediaCardTM (RS MMC), MMCmicro ,

 HS-MMC, MMCmobile, Memory Stick PROTM (MS PRO), Memory Stick PROTM Duo (MS PRO Duo), 

Memory Stick PRO-HGTM (MS PRO-HG), MS Micro (M2) on one chip. As a single chip solution for

 USB 2.0 flash card reader, the GL823K complies with Universal Serial Bus specification rev. 2.0,

 USB Storage Class Specification ver.1.0, and each flash card interface specification. 

The GL823K integrates a high speed 8051 microprocessor and a high efficiency hardware engine for the 

best data transfer performance between USB and flash card interfaces. Its pin assignment design fits to 

card sockets to provide easier PCB layout. Inside the chip, it integrates 5V to 3.3V regulator, 3.3V to 1.8V 

regulator and power MOSFETs and it enables the function of on-chip clock source (OCCS) which means no 

external 12MHz XTAL is needed and that effectively reduces the total BOM cost. The GL823K implements

 USB disconnect function; it can be used for Mobile cable/ OTG reader/ PC card reader application

FEATURES

  USB specification compliance - Comply with 480Mbps Universal Serial Bus specification rev. 2.0 - Comply with USB Storage Class specification rev. 1.0 - Support one device address and up to four endpoints: Control (0)/Bulk Read (1)/Bulk Write (2)/Interrupt (3) 

 Integrated USB building blocks - USB2.0 transceiver macro (UTM), Serial Interface Engine (SIE), Build-in power-on reset (POR) and low-voltage detector (LVD) 

 Embedded 8051 micro-controller - Operate @ 60 MHz clock, 12 clocks per instruction cycle - Embedded mask ROM and internal SRAM 

 Secure DigitalTM (SD) and MultiMediaCardTM (MMC) - Supports SD specification v1.0 / v1.1 / v2.0 / SDHC (Up to 32GB) - Compatible with SDXC (Up to 2TB) - Supports MMC specification v3.x / v4.0 / v4.1 / v4.2 - Supports 1 / 4 bit data bus 

 Memory Stick PRO / Memory Stick PRO Duo / Memory Stick PRO-HG / MS Micro (M2) - Compliant with Memory Stick Series Specification: MS PRO v1.05, MS PRO-HG Duo 1.03, MS Micro (M2) v1.06 - Support 4bit data bus 

 Support boost mode for SD3.0 for better performance 

 Support non-SD Card Detect pin, non-MS Insertion/Removal pin design to save BOM cost 

 Support non-SD Write Protection pin design to save BOM cost 

 Support LED function to indicate power and access status 

 On chip clock source and no need of 12MHz Crystal Clock input 

 On-Chip 5V to 3.3V and 3.3V to 1.8V regulators 

 On-Chip power MOSFET for supplying flash media card power 

 Support USB disconnection by memory card unplug or manual switch for Mobile cable/ OTG reader/ PC card reader application 

 Available in SSOP16 package (150 mil

企业名：深圳市正品科技有限公司

类型：代理商

电话： 0755-83464660

手机：18923811619

联系人：黄先生

QQ：

邮箱：1990498238@qq.com

地址：广东深圳福田区振业花园