Important Notes and Warnings

Micron Technology, Inc. ("Micron") reserves the right to make changes to information published in this

document, including without limitation specifications and product descriptions. This document

supersedes and replaces all information supplied prior to the publication hereof. You may not rely on any

information set forth in this document if you obtain the product described herein from any unauthorized

distributor or other source not authorized by Micron.

Automotive Applications. Products are not designed or intended for use in automotive applications

unless specifically designated by Micron as automotive-grade by their respective data sheets. Distributor

and customer/distributor shall assume the sole risk and liability for and shall indemnify and hold Micron

harmless against all claims, costs, damages, and expenses and reasonable attorneys' fees arising out of,

directly or indirectly, any claim of product liability, personal injury, death, or property damage resulting

directly or indirectly from any use of nonautomotive-grade products in automotive applications.

Customer/distributor shall ensure that the terms and conditions of sale between customer/distributor and

any customer of distributor/customer (1) state that Micron products are not designed or intended for use

in automotive applications unless specifically designated by Micron as automotive-grade by their

respective data sheets and (2) require such customer of distributor/customer to indemnify and hold

Micron harmless against all claims, costs, damages, and expenses and reasonable attorneys' fees

arising out of, directly or indirectly, any claim of product liability, personal injury, death, or property

damage resulting from any use of non-automotive-grade products in automotive applications.

Critical Applications. Products are not authorized for use in applications in which failure of the Micron

component could result, directly or indirectly in death, personal injury, or severe property or

environmental damage ("Critical Applications"). Customer must protect against death, personal injury,

and severe property and environmental damage by incorporating safety design measures into

customer's applications to ensure that failure of the Micron component will not result in such harms.

Should customer or distributor purchase, use, or sell any Micron component for any critical application,

customer and distributor shall indemnify and hold harmless Micron and its subsidiaries, subcontractors,

and affiliates and the directors, officers, and employees of each against all claims, costs, damages, and

expenses and reasonable attorneys' fees arising out of, directly or indirectly, any claim of product liability,

personal injury, or death arising in any way out of such critical application, whether or not Micron or its

subsidiaries, subcontractors, or affiliates were negligent in the design, manufacture, or warning of the

Micron product.

Customer Responsibility. Customers are responsible for the design, manufacture, and operation of

their systems, applications, and products using Micron products. ALL SEMICONDUCTOR PRODUCTS

HAVE INHERENT FAILURE RATES AND LIMITED USEFUL LIVES. IT IS THE CUSTOMER'S SOLE

RESPONSIBILITY TO DETERMINE WHETHER THE MICRON PRODUCT IS SUITABLE AND FIT FOR

THE CUSTOMER'S SYSTEM, APPLICATION, OR PRODUCT. Customers must ensure that adequate

design, manufacturing, and operating safeguards are included in customer's applications and products to

eliminate the risk that personal injury, death, or severe property or environmental damages will result

from failure of any semiconductor component.

Limited Warranty. In no event shall Micron be liable for any indirect, incidental, punitive, special or

consequential damages (including without limitation lost profits, lost savings, business interruption, costs

related to the removal or replacement of any products or rework charges) whether or not such damages

are based on tort, warranty, breach of contract or other legal theory, unless explicitly stated in a written

agreement executed by Micron's duly authorized representative.

Numonyx® Embedded Flash Memory (J3 65 nm) Single Bit per Cell (SBC)

Datasheet

6

1.0 Introduction

This document contains information pertaining to the Numonyx® Embedded Flash

Memory (J3 65 nm) Single Bit per Cell (SBC) device features, operation, and

specifications.

Unless otherwise indicated throughout the rest of this document, the Numonyx®

Embedded Flash Memory (J3 65 nm) Single Bit per Cell (SBC) device is referred to as

J3 65 nm SBC.

The J3 65 nm SBC device provides improved mainstream performance with enhanced

security features, taking advantage of the high quality and reliability of the NOR-based

65 nm technology. Offered in 128-Mbit, 64-Mbit, and 32-Mbit densities, the J3 65 nm

SBC device brings reliable, low-voltage capability (3 V read, program, and erase) with

high speed, low-power operation. The J3 65 nm SBC device takes advantage of proven

manufacturing experience and is ideal for code and data applications where high

density and low cost are required, such as in networking, telecommunications, digital

set top boxes, audio recording, and digital imaging. Numonyx Flash Memory

components also deliver a new generation of forward-compatible software support. By

using the Common Flash Interface (CFI) and Scalable Command Set (SCS), customers

can take advantage of density upgrades and optimized write capabilities of future

Numonyx Flash Memory devices

企业名：深圳市晶浩电子有限公司

类型：贸易/代理/分销

电话： 0755-82564915
0755-82564915

手机：15815559419
18923704196

联系人：吴先生/廖小姐

QQ：

邮箱：2909225061@qq.com

地址：广东深圳深圳市福田区振兴路109号华康大厦2栋216室