原装MT29F4G08ABAEAWP:E NAND FLASH

MT29F4G08ABAEAWP:E（托盘）

MT29F4G08ABAEAWP:E TR（卷带：1000）

IC FLASH 4GBIT PARALLEL 48TSOP I

闪存 - NAND 存储器 IC 4Gb（512M x 8） 并联 48-TSOP I

 

 

原装MT29F4G08ABAEAWP:E NAND FLASH的技术参数：

存储器类型 非易失

存储器格式 闪存

技术 闪存 - NAND

存储容量 4Gb（512M x 8）

存储器接口 并联

电压 - 供电 2.7V ~ 3.6V

工作温度 0°C ~ 70°C（TA）

安装类型 表面贴装型

封装/外壳 48-TFSOP（0.724"，18.40mm 宽）

供应商器件封装 48-TSOP I

基本产品编号 MT29F4G08

RoHS 状态 符合 ROHS3 规范

湿气敏感性等级 (MSL) 3（168 小时）

REACH 状态 非 REACH 产品

ECCN 3A991B1A

HTSUS 8542.32.0071

 

 

一般说明

Micron NAND Flash devices include an asynchronous data interface for high-performance I/O operations. These devices use a highly multiplexed 8-bit bus (I/Ox) to transfer commands, address, and data. There are five control signals used to implement the asynchronous data interface: CE#, CLE, ALE, WE#, and RE#. Additional signals control hardware write protection and monitor device status (R/B#).

This hardware interface creates a low pin-count device with a standard pinout that remains the same from one density to another, enabling future upgrades to higher densities with no board redesign.

A target is the unit of memory accessed by a chip enable signal. A target contains one or

more NAND Flash die. A NAND Flash die is the minimum unit that can independently

execute commands and report status. A NAND Flash die, in the ONFI specification, is

referred to as a logical unit (LUN). There is at least one NAND Flash die per chip enable

signal. For further details, see Device and Array Organization.

This device has an internal 4-bit ECC that can be enabled using the GET/SET features

or by factory (always enabled). See Internal ECC and Spare Area Mapping for ECC for

more information.

 

  

企业名：深圳市迅丰达电子科技有限公司

类型：贸易/代理/分销

电话： 13824331138

手机：13824331138

联系人：陈小姐

QQ：

微信：

邮箱：491961368@qq.com

地址：广东深圳赛格广场3504A