您现在的位置:维库电子市场网 > 元器件 > 电源/稳压器

19V/2-4A适配器、按摩器电源

19V/2-4A适配器、按摩器电源
19V/2-4A适配器、按摩器电源
普通会员
  • 企业名:深圳市安舜科技有限公司

    类型:生产型 贸易型

    电话: 86075586165772

    手机:13798474027

    联系人:陈曦

    地址:广东中国广东深圳市深圳市南山区西丽镇鼎新大厦东座802

商品信息



2.4
时序特性Timing

2.4.1保持时间Hold up Time

满载条件下,电源在100Vac/47Hz输入时,保持时间不小于5mS110/220Vacc/50/60Hz输入时,保持时间不小于8mS

Hold-up time no less than 5mS at 100Vac/47Hz input and no less than 8mS at 110/220Vac/50/60Hz input, the output loading should be set up with full load during the test.

2.4.2启动时间Start up Time

满载条件下,电源在100Vac/47Hz输入时,启动时间不大于3秒;110/220Vac/50/60Hz输入时,启动时间不大于2秒。

Start up time no more than 3 seconds at 100Vac/47Hz input and no more than 2 seconds at 110/220Vac/50/60Hz, the output loading should be set up with full load during the test.

  1. 环境要求Environment Requirement

3.1温度Temperature

  工作环境温度:   0~ 40     Operating Ambient:  0~ 40

  贮存环境温度:  -25~ 55    Non-operating Ambient:  -25~ 55

3.2湿度Humidity

  工作时: 25%~90%相对湿度(非冷凝)Operating:  25%~90% relative humidity (Non- condensing)

  贮存时:10%~90%相对湿度(非冷凝)Non-operating:  10%~90% relative humidity (Non- condensing)

3.3海拔高度Altitude

 工作时:2000Operating:  2000 meters

 贮存时:2000  Non-operating:  2000meters

  1. 可靠性Reliability

4.1平均无故障间隔时间MTBF  (MIL-HDBK-217F)

25环境温度,满载条件,额定电压输入条件,平均无故障间隔时间≥10K小时.

MTBF no less than 10K hours (25 degrees C, Full load and rated voltage input)

4.2老化寿命测试Burn-in and Life test 

Asuntech将与客户评估并确认电源产品室内老化寿命测试过程。

Asuntech shall discuss with customer to make sure the power in house Burn-In and life test procedures.

  1. 产品安规要求Product Safety Requirement

5.1标准Standard

遵循IEC60065(音、视频类产品安全要求)要求.

Meet IEC60065 (Audio and video products -safety requirement) standard requirement.

5.2接触电流Leakage Current 

接触电流不得超过3.5mA (220Vac/50Hz).

Leakage current shall not exceed 3.5mA at 220Vac/50Hz.

5.3绝缘阻抗Insulation Resistance

初级对次级:20M欧姆,500VDC

-Primary to Secondary: 20 Meg. Ohms min. 500VDC

5.4绝缘强度Dielectric Strength Testing 

绝缘强度满足下表的要求,100%在线产品执行此项测试,并每一项目至少保持60S时间,无任何故障。

Hi-pot test shall be met the table 8 requirements, an item listing this test as a 100% production test must be performed and be maintained at that level for a minimum of 3 seconds without failure.

8:耐压测试   Table 8: Hi-pot test

 

项目Item

规格要求Specification

备注Remark

输入-----输出Primary to Secondary

3.0KVac

<10mA

无飞弧No arcing

无击穿No broken

输入-----   Primary to P.G

N/A

N/A

"

联系方式

企业名:深圳市安舜科技有限公司

类型:生产型 贸易型

电话: 86075586165772

手机:13798474027

联系人:陈曦

地址:广东中国广东深圳市深圳市南山区西丽镇鼎新大厦东座802

提示:您在维库电子市场网上采购商品属于商业贸易行为。以上所展示的信息由卖家自行提供,内容的真实性、准确性和合法性由发布卖家负责,请意识到互联网交易中的风险是客观存在的。请广大采购商认准带有维库电子市场网认证的供应商进行采购!

电子元器件产品索引: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9