APEM 9000系列操作杆 900223


模拟量输出摇杆工业操纵杆900223手指操作型操纵杆Apem摇杆CH操纵杆进口摇杆进口操纵杆
 9000系列操纵杆是一款新型无接触式工业级操纵杆，
针对面板下空间较紧张的应用而设计。
从7000系列发展而来；无接触控制杆，无接触摇杆。
长寿命摇杆
电感型摇杆；模拟量摇杆；
单轴操纵杆，双轴操纵杆
5V - 15V 控制电压
多种手柄可选

保护等级IP65以上面板密封。

NOTES
1. BEZEL OPTIONS
For drop in mounting, please specify bezel option 6 or 7. For sub-panel mounting, no bezel is necessary, unless the boot is
required to seal to the front face of the panel in which case bezel option 4 should be specified. Bezels 6 & 7 clamp the boot
and top face of the joystick body to the panel whereas bezel 4 clamps only the boot.
2. SPRINGING
As standard 9000 Series are offered sprung to centre. The standard spring force requires 1.3N (nominally) to off-center the
joystick. The 9000 Series may be specified with a lighter spring (1N), or a stronger spring (1.6N)
Note: Forces quoted are subject to exact joystick configuration and are provided as a guide only.
3. DUAL DECODE INTERFACE
For optimum performance of the center detect and fault detect signals, Apem recommends the signals are “pulled high” via
an input resistor of typically 22k, on the controller circuitry.
4. CENTER TAP REFERENCE
All 9000 Series output a center tap reference as standard. This reference is set within the joystick at 50% of Vcc (+/-1%).
For optimum accuracy the outputs should be read relative to the center tap.
5. NON STANDARD
Further non standard options including custom handles or special limiters are available. Please refer to the factory for
further details.

企业名：上海途壹电子科技有限公司

类型：贸易/代理/分销

电话： 021-36588205
021-36588207

手机：18924626834
18019247532

联系人：卢先生/关先生

QQ：

微信：

邮箱：cyl@tooye.net

地址：上海上海市宝山区沪太路4361号10号楼301