长期供应德国赛卡SEIKA加速度传感器（加速度计）、倾角（倾斜）传感器（倾角计）详情请致电深圳市莱逸电气有限公司： 德国赛卡SEIKA公司加速度传感器：B1、B2、B3/BDK3、BDK10、BDK100 加速度传感器-静态（低限截止频率=0Hz）：B1、B2、B3 集成电路设计，可*很*度的振动，用于静态测量频率从*到数百赫兹的振动 -测量范围：&plu*n;3g，&plu*n;10g，&plu*n;50g（换算公式：1g=9.81m/s2） -分辨率：<0.001g，<0.005g，<0.02g -频率范围：0-160Hz，0-350Hz，0-550Hz -输出：*电压DC/数字PWM -供电电压：5VDC（允许范围3V~6V） -工作温度：-40℃~ 85℃（125℃可选） -*护等级：IP65 加速度传感器-动态（低限截止频率=1 Hz或10Hz）：BDK3、BDK10、BDK100 集成电路设计，可*很*度的振动，用于动态测量频率从*到数千赫兹的振动 -测量范围：&plu*n;3g，&plu*n;10g，&plu*n;100g（换算公式：1g=9.81m/s2） -分辨率：<0.001g，<0.005g，<0.05g -频率范围：1-300Hz，1-800Hz，1-1500Hz -输出：*电压DC -供电电压：5VDC（允许范围2V~6V） -工作温度：-40℃~ 85℃ -*护等级：IP65德国赛卡SEIKA传感器选型汇总：Static Accelerometers (lower cut-off frequency = 0 Hz)Model Measuring rangeResolutionB1, B2, B3&plu*n;3g, &plu*n;10g, &plu*n;50g ( 1g = 9.81ms-2 )<0.001g, <0.005g, <0.01g Dynamic Accelerometers (lower cut-off frequency = 1 or 10 Hz)ModelMeasuring rangeResolutionFrequenzy rangeBDK3&plu*n; 3 g < 10-3 g 1...300 HzBDK10&plu*n; 10 g < 5*10-3 g 1... 800 HzBDK100&plu*n; 100 g < 1*10-2 g 1... 1.5 kHzInclinometersModelMeasuring rangeResolution*3&plu*n;10° (&plu*n;20°) <0.001°NA2-05, NA2-10NA3-30NA4-45, NA4-70&plu*n;5°, &plu*n;10°&plu*n;30°&plu*n;45°, &plu*n;70° <0.001Grad, <0.002Grad<0.005Grad<0.01Grad, <0.01GradN2, N3, N4&plu*n;10°, &plu*n;30°, &plu*n;70° <0.001°, <0.005°, <0.005° NG2, NG3, NG4&plu*n;10°, &plu*n;30°, &plu*n;80° <0.001°, <0.005°, <0.005° NG...IInclinometer t*e NG2, NG3, NG4 with integrated 4...20mA signal conditioner NG...U Inclinometer t*e NG2, NG3, NG4 with integrated 0...5V signal conditioner NG360 Inclinometer with 360° measuring range and integrated microprocessor and RS485 interface Sensor boxes (for harsh operating conditions)Model Features*1ISensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of any t*e and one integrated signal conditioner with 4...20mA output.*2ISensor box (98 x 64 x 56mm3) with two integrated SEIKA sensors of t*e B, BD, BDK, N or * and two integrated signal conditioners with a 4...20mA output each. Both channels are electrically isolated from each other.*1USensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of any t*e and one integrated signal conditioner with 0...5V output.*1SSensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of any t*e, one integrated signal conditioner with 0...5V output and two open collector switch outputs that respond to traversing of adjustable thresholds.*S1USensor box (98 x 64 x 56mm3) with one integrated SEIKA-Servo-Inclinometer for measuring *all angles of up to 2 degrees with very high resolution and an integrated signal conditioner with 0...5V output.*360Sensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of t*e NG360, internal microprocessor and RS485 interface.*G2USensor box (124 x 80 x 58mm3) with two integrated SEIKA sensors of t*e NG and two 0...5V outputs.*G3ISensor box (124 x 80 x 58mm3) with three integrated SEIKA sensors and three integrated signal conditioners with 4...20mA output.*L1Sensor box (180 x 180 x 100mm3 - large and robust) with one integrated SEIKA sensor of any t*e and one integrated signal conditioner with 4...20mA output.*L1SSensor box (180 x 180 x 100mm3 - large and robust) with two integrated SEIKA sensors of any t*e, one integrated signal conditioner with 4...20mA output, one integrated signal conditioner with 0...5V output and two safety relays that respond to traversing of adjustable thresholds. The *L1S has two redundant, electrically isolated measuring channels for safety related applications.XB..Extra robust, pressure-, saltwater- and corrosion-proof stainless steel sensor box (ø120 x 50) as an alternative to the *.. housings (180 x 180 x 100mm3) for especially harsh operating conditions, aggressive fluids and saltwater.S*85BBox (63.5 x 58 x 35mm3) with RS485/RS232 converter for operation of inclinometers NG360, *360, and XB360 from a RS232 port.Sensor accessoriesModelFeaturesNV4aFiltering signal conditioner for sensor signal matching with symmetrical /- 4 V voltage outputNV6aFiltering signal conditioner for sensor signal matching to a 4...20mA, 2-wire interfaceNV8aFiltering signal conditioner for sensor signal matching with an asymmetric 0...5V output voltageSW3Sensor cube for multiaxial arrangement of SEIKA accelerometers and/or SEIKA inclinometers*BS, *BB, *BWFixing plates from stainless steel for sensor boxes *.. 德国赛卡SEIKA静态加速度计（加速度传感器）产品详细信息：Featuresvery high overload resistanceinsensitive to interference by magnetic and electric fieldslower cut-off frequency is zero, hence suitable for measuring static acceleration, such as gravity (inclinations) or radial acceleration (centrifugal force)linear frequency response with little or no resonant peak at upper cut-off frequencylow non-linearityhigh signal-to-noise rationo measurable hysteresis of signalhermetically sealedhigh long-term stability*all temperature driftintegrated sensor electronics*og DC or pulse width modulated or frequency modulated outputlow power consumptionvery short on-transition delaymultiple housing optionsDescriptionThe sensors B1, B2 and B3 are capacitive spring-m* accelerometers with integrated electronics. Resonant peaks are minimized by special gas-dynamic damping in the primary transformer.The sensors are manufactured with an *og DC output. The sensor electronics require only *all amounts of power and are in conjunction with the capacitive primary transformer characterized by low error and high long-term stability.ApplicationThe accelerometers B1, B2 and B3 are used for applications requiring high overload tolerance, high long-term stability, *all lower cut-off frequency down to measurement of static acceleration, very short on-transition delay and low power consumption. T*ical applications include:measurements on vehicles, machinery, buildings and plants for process control and error diagnosissei*ic measurementsinclination measurementssafety engineeringdynamic measurement of position and velocityTechnical SpecificationsT*:B1B2B3 Measuring range&plu*n;3g (ca.&plu*n;30m/s2) &plu*n;10g (ca.&plu*n;100m/s2) &plu*n;50g (ca.&plu*n;500m/s2) Resolution<10-3g <5·10-3g <2·10-2g Frequency range 0...160Hz0...350Hz 0...550HzLinearity deviation<0,5%Transverse sensitivity<1%Mechanical overload resistance in direction of measurement 10 000 g (approx. 100 000 m/s2)Nominal supply voltage (regulated) UbN = 5Volt Permissible range of supply voltage Ubz = 3V ... 6V Current drawn at Ub = 5V approx.1mA Degree of protectionIP65 Operating temperature-40°C ... 85°C (125°C optional)Storage temperature-45°C ... 90°C (125°C optional)Weight (in metal housing without cable) approx. 23 grams Standard electrical connection 3 highly flexible, color-coded wires ø1mm, length approx. 18 cm (special lengths on request) Alternative electrical connection 0.5m strong, flexible, shielded cable ø2.1mm (special lengths on request)3 flexible, color-coded wires with Teflon insulation for extended temperature rangeValues for *og DC output at UbN = 5 Volt Sensitivity approx. 140mV/g approx. 30mV/gapprox. 7,5mV/g Temperature drift of sensitivity < 6·10-2 % / KTemperature drift of zero point <0.1mV/K Zero offset at Ub=5V 2.5&plu*n;0.1Volt - generally: 0.5Ub&plu*n;4% Output impedance10 kOhm

企业名：深圳市莱逸电气有限公司

类型：经销商

电话：

联系人：卢文忠

地址：广东深圳中国 广东 深圳市宝安区 龙华新区民治街道民治大道民泰大厦6068