C*電池 C*蓄電池 臺灣C*電池 美國C*蓄電池
台湾C*蓄电池*服务电话：400-688-0802
|
C*-GP系列 |
|
|
|
|
GP的字义General Purpose，该系列产品具备**的蓄电池科技之功能。 在*的使用环境时，免保养，免加水，可重覆循环使用。电槽外壳经*音波*密封，置放时不受方向、位置之限制，除依印刷字体方向置放外，亦可以倒立放置、横向放置等各种放置方式，均不影响其*与功能。以*配方的铅钙耐蚀合金及全自动化制造，品质稳定产品不会产生危险气体。精密技术配方，使用寿命长，自行放电率*低，具有优良的使用*度。具有*的*性，*的低阻*度，回充容易，能量的输出发挥*致。使用耐燃材质电槽，*合UL 94V-0。可CYCL*TANDBY等*功能使用．高率放电性能优异。深度放电後亦可回复充电。电池於制造完成後，*须经过*严密之容量侦测。通过ISO9002、9001、14001。通过UL*。航空运输*IATA/ICAO A67条款。水路运输*合非危险物品MG27修正类别．公路运输*合【Dry charge】 49CFR 171-189许可。
|
|
安培数 |
4.5 Ah @ 20hr-rate to 1.75V per cell @ 25°C (77°F) |
|
重量(kg) |
Approx. 0.84kg. (1.85 lbs.) |
|
*大放电电流5秒(A) |
60A/90A (5sec.) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5°F~104°F) |
|
一般使用温度工作范围 |
25°C ± 3°C (77°F ± 5°F) |
|
浮充使用充电条件 |
6.75 to 6.9 VDC/unit Average at 25°C (77°F) |
|
循环寿命测试条件 |
7.2 to 7.5 VDC/unit Average at 25°C (77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25°C (77°F) Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
端子 |
F1/F2-Faston Tab187/250 |
|
电槽组材质 |
ABS(UL94-HB/File E50263)*Flammability resistance of(UL94-V0/File E88637) can be available upon request. |
|
|
|
安培数 |
7.2 Ah @ 20hr-rate to 1.75V per cell @ 25°C (77°F) |
|
重量(kg) |
Approx. 1.22kg. (2.69 lbs.) |
|
*大放电电流5秒(A) |
100A/130A (sec..) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5°F~104°F) |
|
一般使用温度工作范围 |
25°C ± 3°C (77°F ± 5°F) |
|
浮充使用充电条件 |
6.75 to 6.9 VDC/unit Average at 25°C (77°F) |
|
循环寿命测试条件 |
7.2 to 7.5 VDC/unit Average at 25°C (77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25°C (77°F) Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
端子 |
F1/F2-Faston Tab187/250 |
|
电槽组材质 |
ABS(UL94-HB/File E50263)*Flammability resistance of(UL94-V0/File E88637) can be available upon request. |
|
|
|
安培数 |
12 Ah @ 20hr-rate to 1.75V per cell @ 25°C (77°F) |
|
重量(kg) |
Approx. 1.85kg. (4.08 lbs.) |
|
*大放电电流5秒(A) |
150A/180A (5sec.) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5°F~104°F) |
|
一般使用温度工作范围 |
25°C ± 3°C (77°F± 5°F) |
|
浮充使用充电条件 |
6.75 to 6.9 VDC/unit Average at 25°C (77°F) |
|
循环寿命测试条件 |
7.2 to 7.5 VDC/unit Average at 25°C (77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25°C (77°F) Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
端子 |
F1/F2-Faston Tab187/250 |
|
电槽组材质 |
ABS(UL94-HB/File E50263)*Flammability resistance of(UL94-V0/File E88637) can be available upon request |
|
|
|
安培数 |
2.2 Ah @ 20 Hr-Rate to 1.75V Per Cell @ 25℃(77℉) |
|
重量(kg) |
Approx. 0.90 Kg (1.98 lbs) |
|
*大放电电流5秒(A) |
40A /60A (5 Sec) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5℉~104℉) |
|
一般使用温度工作范围 |
25℃±3℃(77°F±5°F) |
|
浮充使用充电条件 |
13.5 to 13.8 VDC/Unit Average at 25℃ (77°F) |
|
循环寿命测试条件 |
14.4 to 15.0 VDC/Unit Average at 25℃(77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25℃(77°F). Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
端子 |
F1/F2-Faston Tab187/250 |
|
电槽组材质 |
ABS(UL94-HB/File E50263)*Flammability resistance of(UL94-V0/File E88637) can be available upon request. |
|
|
|
安培数 |
4.5 Ah @ 20hr-rate to 1.75V per cell @ 25°C (77°F) |
|
重量(kg) |
Approx. 1.66kg. (3.66 lbs.) |
|
*大放电电流5秒(A) |
60A/90A (5sec.) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5°F~104°F) |
|
一般使用温度工作范围 |
25°C ±3°C (77°F ± 5°F) |
|
浮充使用充电条件 |
13.5 to 13.8 VDC/unit Average at 25°C (77°F) |
|
循环寿命测试条件 |
14.4 to 15.0 VDC/unit Average at 25°C (77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25°C (77°F) Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
端子 |
F1/F2-Faston Tab187/250 |
|
电槽组材质 |
ABS(UL94-HB/File E50263)*Flammability resistance of(UL94-V0/File E88637) can be available upon request. |
|
|
|
安培数 |
7.2 Ah @ 20hr-rate to 1.75V per cell @ 25°C (77°F) |
|
重量(kg) |
Approx. 2.40kg. (5.29 lbs.) |
|
*大放电电流5秒(A) |
100A/130A (5sec.) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5°F~104°F) |
|
一般使用温度工作范围 |
25°C ± 3°C (77°F ± 5°F) |
|
浮充使用充电条件 |
13.5 to 13.8 VDC/unit Average at 25°C (77°F) |
|
循环寿命测试条件 |
14.4 to 15.0 VDC/unit Average at 25°C (77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25°C (77°F) Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
端子 |
F1/F2-Faston Tab187/250 |
|
电槽组材质 |
ABS(UL94-HB/File E50263)*Flammability resistance of(UL94-V0/File E88637) can be available upon request. |
|
|
|
安培数 |
12 Ah @ 20hr-rate to 1.75V per cell @ 25°C (77°F) |
|
重量(kg) |
Approx. 3.67kg. (8.09 lbs.) |
|
*大放电电流5秒(A) |
150/180A (5sec.) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5°F~104°F) |
|
一般使用温度工作范围 |
25°C ± 3°C (77°F ± 5°F) |
|
浮充使用充电条件 |
13.5 to 13.8 VDC/unit Average at 25°C (77°F) |
|
循环寿命测试条件 |
14.4 to 15.0 VDC/unit Average at 25°C (77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25°C (77°F) Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
端子 |
F1/F2-Faston Tab187/250 |
|
电槽组材质 |
ABS(UL94-HB/File E50263)*Flammability resistance of(UL94-V0/File E88637) can be available upon request. |
|
|
|
安培数 |
17 Ah @ 20hr-rate to 1.75V per cell @ 25°C (77°F) |
|
重量(kg) |
Approx. 5.5kg. (12.13 lbs.) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5°F~104°F) |
|
一般使用温度工作范围 |
25°C ± 3°C (77°F ± 5°F) |
|
浮充使用充电条件 |
13.5 to 13.8 VDC/unit Average at 25°C (77°F) |
|
循环寿命测试条件 |
14.4 to 15.0 VDC/unit Average at 25°C (77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25°C (77°F) Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
电槽组材质 |
ABS(UL94-HB/FileE50263)*Flammability resistance of(UL94-V0/File E54297) can be available upon request. |
|
|
|
安培数 |
20Ah @ 20hr-rate to 1.75V per cell @ 25°C (77°F) |
|
重量(kg) |
Approx. 6.4kg. (14.1 lbs.) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5°F~104°F) |
|
一般使用温度工作范围 |
25°C ± 3°C (77°F± 5°F) |
|
浮充使用充电条件 |
13.5 to 13.8 VDC/unit Average at 25°C (77°F) |
|
循环寿命测试条件 |
14.4 to 15.0 VDC/unit Average at 25°C (77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25°C (77°F)Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
端子 |
I1-Thread lead alloy recessed terminal to accept M5 bolt |
|
电槽组材质 |
ABS(UL94-HB/File E50263)*Flammability resistance of(UL94-V0/File E88637) can be available upon request. |
|
|
|
安培数 |
26 Ah @ 20hr-rate to 1.75V per cell @ 25°C (77°F) |
|
重量(kg) |
Approx. 8.45kg. (18.63 lbs.) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5°F~104°F) |
|
一般使用温度工作范围 |
25°C ± 3°C (77°F ± 5°F) |
|
浮充使用充电条件 |
13.5 to 13.8 VDC/unit Average at 25°C (77°F) |
|
循环寿命测试条件 |
14.4 to 15.0 VDC/unit Average at 25°C (77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25°C (77°F) Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
端子 |
B1/B3/B3B-L terminal to accept M5 nut & bolt |
|
电槽组材质 |
ABS(UL94-HB/File E50263)*Flammability resistance of(UL94-V0/File E88637) can be available upon request. |
|
|
|
安培数 |
34 Ah @ 20hr-rate to 1.75V per cell @ 25°C (77°F) |
|
重量(kg) |
Approx. 10.48kg. (23.10 lbs.) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5°F~104°F) |
|
一般使用温度工作范围 |
25°C ± 3°C (77°F± 5°F) |
|
浮充使用充电条件 |
13.5 to 13.8 VDC/unit Average at 25°C (77°F) |
|
循环寿命测试条件 |
14.4 to 15.0 VDC/unit Average at 25°C (77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25°C (77°F) Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
端子 |
B5-L terminal to accept M5 nut & bolt |
|
电槽组材质 |
ABS(UL94-HB/File E50263)*Flammability resistance of(UL94-V0/File E88637) can be available upon request. |
|
|
|
安培数 |
40 Ah @ 20hr-rate to 1.75V per cell @ 25°C (77°F) |
|
重量(kg) |
Approx. 12.63 kg. (27.84 lbs.) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5°F~104°F) |
|
一般使用温度工作范围 |
25°C ± 3°C (77°F ± 5°F) |
|
浮充使用充电条件 |
13.5 to 13.8 VDC/unit Average at 25°C (77°F) |
|
循环寿命测试条件 |
14.4 to 15.0 VDC/unit Average at 25°C (77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25°C (77°F) Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
电槽组材质 |
ABS(UL94-HB/FileE50263)*Flammability resistance of(UL94-V0/File E54297) can be available upon request. |
|
|
|
安培数 |
65 Ah @ 20hr-rate to 1.75V per cell @ 25°C (77°F) |
|
重量(kg) |
Approx. 20.0kg. (44.09 lbs.) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5°F~104°F) |
|
一般使用温度工作范围 |
25°C ± 3°C (77°F ± 5°F) |
|
浮充使用充电条件 |
13.5 to 13.8 VDC/unit Average at 25°C (77°F) |
|
循环寿命测试条件 |
14.4 to 15.0 VDC/unit Average at 25°C (77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25°C (77°F) Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
端子 |
B4-L terminal to accept M6 nut & bolt |
|
电槽组材质 |
Pol*ropylene(UL 94-V0/File E50955)*Flammability resistance of (UL 94-HB/File E216959) can be available upon request. |
|
|
|
安培数 |
100 Ah @ 20 Hr-Rate to 1.75V Per Cell @ 25℃(77℉) |
|
重量(kg) |
Approx. 31.2 Kg (68.78 lbs) |
|
温度工作范围 |
Discharge：-15℃~50℃(5°F~122°F)
Charge：-15℃~40℃(5°F~104°F)
Storage：-15℃~40℃(5°F~104°F) |
|
一般使用温度工作范围 |
25℃±3℃(77°F±5°F) |
|
浮充使用充电条件 |
13.5 to 13.8 VDC/Unit Average at 25℃ (77°F) |
|
循环寿命测试条件 |
14.4 to 15.0 VDC/Unit Average at 25℃(77°F) |
|
单一放电条件 |
C* Batteries can be stored for more than 6 months at 25℃(77°F). Please charge batteries before using. For higher temperatures the time interval will be shorter. |
|
端子 |
I2-Thread lead alloy recessed terminal to accept M6 bolt |
|
电槽组材质 |
Pol*ropylene(UL 94-V0/File E50955)*Flammability resistance of (UL 94-HB/File E216959) can be available upon request |
|
浏览相关产品 |
|
