S-100W系列单组输出

                                  S-100W系列单组输出

                                     ■ 接线位置：7位 9.5mm端子
                                     ■ L，N：AC输入
                                     ■    ：接大地
                                     ■ -V：DC输出负端
                                     ■ +V：DC输出正端

输入电压范围
                                 85-132VAC/170-264VAC 47-63Hz 240-370VDC
AC input voltage range
输入电流
                                 2.4A/115V 1.2A/230V
Input current
冲击电流                             冷启动电流 30A/115V 60A/230V
AC inrush current                Cold-start current 30A/115V 60A/230V
漏电电流
                                 <1mA/240VAC
Leakage current
直流电压可调范围                         额定输出电压的&plu*n;10%
DC adjustable range              &plu*n;10% rated output voltage
过载保护                             105-150% 切断输出，自动恢复
Over load protection             105-150% hiccup mode,auto-recovery
过电压保护
Over-voltage protection
启动、上升、保持时间
                                 200ms 50ms 20ms
Setup rise lold up time
                                 I/P-O/P:3KVAC 1minute
耐压性
                                 I/P-FG:1.5KVAC 1minute
Withstand voltage
                                 O/P-O/P:0.5KVAC 1minute
工作温度、湿度
                                 -10℃～+60℃.20%-90% RH
Working temperature
重量/包装
                                 0.55kg.45pcs/24.75kg
Weight/packing

     型号t*e               输出Output                差值Error            范围Range               效率Efficiency
     S-100-5                5V，0-20A                   &plu*n;2%                70mV                     71%
     S-100-12              12V，0-8.3A                  &plu*n;1%                100mV                    78%
     S-100-15               15V，0-6.6A                 &plu*n;1%                100mV                    78%
     S-100-24              24V，0-4.1A                  &plu*n;1%                100mV                    82%

*TE:                            1. All parameters *T specially mentioned are measured at 230VAC input, rated load
                                 and 25℃ of ambient temperature.
                                 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-
                                 wire terminated with a 0.1uf & 47uf parallel capacitor.
                                 3. Tolerance : includes set up tolerance, line regulation and load regulation.
                                 4. The power supply is considered a component which will be installed into a final
                                 equipment. The final equipment must be re-confirmed that it still meets
                                 EMC directives.
                                 5. If the power supply is short-circuited under no load, it will recover automatically
                                 when short-circuit is removed.

企业名：青岛卓成电气有限公司

类型：经销商

电话： 0532-80829361

联系人：耿浩

地址：山东青岛青岛市北区山东路111号 中央CBD