*率
0.1-10R
线绕
熔断
是
中频
*
*
250(W)
1/4W---2W
其他
&plu*n;5%
企业名:深圳市铨洲科技有限公司
类型:生产加工
电话: 0755-29886981
联系人:黄晓莉
地址:广东深圳光明新区公明街道合水口银朗工业区一栋
∟ 贴片(片式/SMD)电容(1)∟ 陶瓷电容(1)∟ 其他电容(2)
Electronics (shen zhen ) Co.,Ltd.
1.2品質Quality
本電阻的制造系經高品質管理程序,并具有高信賴的品質保證。
The resistor manufactured by highly quality-controlled process and guaranteed high reliability。
1.3標準試驗狀態Stand measuring conditions
溫度20&plu*n;2℃、濕度65&plu*n;5%。
但在溫度3~35℃、濕度45~85%之情況下,仍可以給予判定。
Temperature 20&plu*n;2℃,Humidity65&plu*n;5%。
Being no doubt about the judgment, measurements can be made within the following temperature3~35℃、
Humidity45~85%。
1.4型名(例)T*e designation (example)
依使用種類、額定電力、形狀;電阻值容許差、公稱電阻值而區別,其標示方式如下:
The t*e designation shall be in the following form and as specified.
NKNP | 1/2W | T52 | J | 10R | |||
種類 TYPE | 額定功率 Rated power | 形狀 Form | 電阻值容許差 Resistance Tolerance | 公稱電阻值 Nominal Resistance value | |||
Normal | Small | P | Bulk | K | &plu*n;10% | E-12 Series | |
1/2W | 1WS | Txx | Taping XXmm | J | &plu*n;5% | E-24 Series | |
1W | 2WS | r | r-Form series | G | &plu*n;2% | E-48 Series | |
2W | 3WS |
|
| F | &plu*n;1% | E-96 Series |
1.5訂購方式HOW TO ORDER PART NU*ER
KN 1W P J 10R
a b c d e
a | Wire wound resistors | a名稱 |
b | Rated power | b額定功率 |
c | Form | c型式 |
d | Tolerance(&plu*n;5%) | d容許差值 |
e | Resistance value(10Ω) | e阻值 |
1.6額定電力及尺寸Rated power and dimensions
額定電力系適應在周圍溫度70℃可以連續負載的*大電力,如表-1:但周圍溫度如*過70℃時之額定電力則依圖一的電力輕減曲線實施。
Rated power is maximum power which can be continuously loaded at specified ambient temperature
70℃,however when the ambient temperature exceeds 70℃,rated power should be determined form the derating curve of Fig.1.
表—1 Table—1
KNY DIMENSIONS:
|
|
C. F-T*e
( “H1”部份可剪,但長度不得小於6mm)
“H1” part can be cut, but can’t be *all than 6mm
友情链接: 深圳市元东发电子有限公司