J*、BJZ、DG、BZ系列照明、行灯控制变压器

概述

J*、BJZ、DG、BZ型系列照明变压器适用于交流50HZ，电压500V及以下的电路中，作为机床及其它设备的局部照明灯电源。

J*、BJZ、DG系列变压器是由TP-DK系列变压器和*护外壳构成，外壳两侧有供输入电源和负载接线用的接线柱，并有供接地用的接地螺钉；BZ型照明变压器是由TP-DK50、TP-DK100控制变压器、LS3-2型主令开关及保护外壳组成，在主令开关上装有熔断器，用以保护照明回路，电源从装有主令开关一端的*尘薄膜处引入，通过主令开关来接通和分断照明灯。

J*、BJZ、DG、BZ型系列照明、行灯控制变压器技术特性

初级次级绕组分开绕制，当次级只有一个绕组时，它担负变压器的*额定容量，次级如兼有控制、照明及指示灯绕组时，则按各绕组容量分配分别绕制，对单绕组且有中间抽头的变压器其各中间抽头容量，皆小于变压器的额定容量，只有*高电压输出端可担负额定容量。

J*, BJZ, DG, BZ series illumination, portable lamp control transformer

Application:

J*, BJZ, DG, the BZ series lighting transformer is suitable in exchanges 50HZ, in voltage 500V and the following electric circuit, takes the engine bed and other equipment's partial flare power source.

J*, BJZ, the DG series transformer is by TP-DK the series transformer and the protective covering constitution, the outer covering both sides has for inputs the wiring column which the power source and the load wiring use, and has the earthing screw which uses for the earth; The BZ lighting transformer is by TP-DK 50, TP-DK100 controls the transformer, LS3-2 to order the switch and the protective casing is composed, in orders on the switch to be loaded with the fuse, with protects the illumination return route, the power source from is loaded with orders a switch end the dustproof thin film to pull into, through orders the switch to put through and the breaking flare.

J*, BJZ, DG, BZ series illumination, portable lamp control transformer technology characteristic

primary secondary circles the system separately, when secondary when a winding, it shoulders the transformer completely the rated capacity, when secondary like has at the same time the control, the illumination and the indicating lamp winding, presses various windings capacity *ignment to circle the system separately, to simplex winding, and has intermediate tap's transformer its each intermediate tap capacity, is smaller than transformer's rated capacity, only then the overvoltage out-port may shoulder the rated capacity.