品牌:XHXN 型号:HL-FSX2 类型:数字式风速仪 测量范围:0-60m/s 测量精度:+-0.5 测量对象:风速，风向 分辨率:0.1 风速:60（m/s） 重量:1.5（kg） 电源:220V

HL-FSX2智能风速风向仪是我公司专为各种大型机械设备、野外监测、高空作业而研制开发的智能风速风向传感报警设备，其内部采用了*的微处理器作为控制*，外围采用了*的数字通讯技术。系统稳定性高、*干扰能力强，检测精度高，风杯采用工程塑料合金材料制成，机械强度高、*风能力强，控制器机箱设计新颖*，坚固耐用，风向可显示16个方向,安装使用方便。*的电接口均*合国际标准，安装时免调试，适用于不同的工作环境。

产品特点

1. 宽范围的工作环境。工作温度：-40℃～＋85℃，相对湿度：10%～95％

2. 传感器与显示器之间采用数字通信方式，并利用CRC数据通信校验、数据冗余校验，数字滤波等多种数据处理方式*的*了系统稳定性和*干扰能力。

3. 1*it分辨率的电流环报警输出，两路继电器控制输出，蜂鸣器声音提示报警。

4. 迷你型显示器机箱设计，四位显示精度。可任意切换风速显示与风级显示。

5. 风速传感器采用耐腐蚀材料，耐腐蚀性好、风杯*风能力强，可*17级。

6. 多路多信号报警输出控制，使用环境广泛。

7. 工作电压范围广：AC85～AC260V

8. *的手掌式仪表可对报警器进行参数设置、参数读取校正，*了报警参数的误改。

9. 免调试

应用范围

工业、电力、港口、厂矿等各种大型机械设备上用于风速报警使用。

主要技术参数

1.环境条件：

1.1工作环境温度 -40℃～＋85℃

1.2相对湿度 10％～95％

2.输入电源：

2.1额定工作电压：AC85V～AC260V

3.风速测量范围：

3.10～60（米/秒）即0-17风级

3.2　测量误差：（0.4+0.05x实际风速值）米/秒

3.3　起动风速小于0.5m/s

4.风向测量

4.1 东,南,西,北,东南,西南,东北,西北，偏西，偏北，偏南，偏东 16个方向

4.2 风向*小分辩率：22.5度

5.*风强度：

5.1 *大*风速不小于60m/s

6.多路报警输出：

6.1 电流环输出、2路继电器控制输出，内部蜂鸣器

提示声音输出。数字通讯输出。

7.数字显示：

7.1　显示位数：　双排显示

7.2　显示内容：　风速，风级　（可切换）　

7.3　显示刷新频率：1秒／次

8.风向显示

8.1采用16个LED指示风向

9.*护等级：IP65
HL-FSX2 *art meter wind speed and direction of my company for a variety of large-scale machinery and equipment, field monitoring, high-altitude operations and research and development of intelligent wind speed and direction sensing alarm device, its internal use of advanced microprocessor as control core, external useadvanced di*al communications technology.System stability, high anti-jamming, high precision and engineering plastic alloy material with the wind cups made of high mechanical strength, strong wind resistance, the controller ch*is design novel and unique, rugged, wind direction can be displayed 16,convenient installation.All the electrical interfaces are in line with international standards, installation, commissioning free, suitable for different working environment.

Features
1. A wide range of working environment.Operating temperature: -40 ℃ ~ +85 ℃, relative humidity: 10% ~ 95%
2. Between the sensor and display di*al communication and data communication using CRC checksum, data redundancy check, data processing and other di*al filtering methods effectively improve the system stability and anti-jamming capability.
3. 1*it resolution of the current loop alarm output, two relay control output, alarm buzzer sound prompts.
4. Mini display ch*is design, the four display accuracy.Can switch back and forth with the wind speed display level display.
5. Wind speed sensor is corrosion-resistant materials, good corrosion resistance, the wind cups strong wind resistance of up to 17.
6. Multi-multi-alarm signal output control, extensive use environment.
7. Working voltage range: AC85 ~ AC260V
8. Separate handheld meter can set the alarm parameters, parameter read the correction, the errors to prevent the alarm parameters change.
9. To avoid debugging

Applications
Industry, power, ports, factories, mines and other large mechanical equipment used for wind speed alarm.
Main technical parameters
1. Environmental conditions:
1.1 Operating temperature -40 ℃ ~ +85 ℃
1.2 Relative humidity 10% ~ 95%
2. Input Power:
2.1 Rated voltage: AC85V ~ AC260V
3. Wind speed measurement range:
3.1 0 ~ 60 (m / s), or 0-17 wind level
3.2 measurement error: (0.4 +0.05 x actual wind speed value) m / s
3.3 The starting wind speed is less than 0.5m / s
4. Wind measurement
4.1 east, south, west, north, southeast, southwest, northeast, northwest, west, north, south, easterly direction for 16
Minimum Resolution 4.2 Wind: 22.5 degrees
5. Wind strength:
Maximum resistance to wind speed of not less than 5.1 60m / s
6. Multi-alarm output:
6.1 The current loop output, two relay control output, internal buzzer
Prompt sound output.Di*al communication output.
7. Figures show:
7.1 shows the median: double display
7.2 display: wind speed, wind level (switchable)
7.3 Display Refresh Rate: 1 sec / time
8. Wind direction display
8.1 with 16 LED wind direction
9. Protection cl*: IP65

企业名：闫超

类型：生产加工

电话： 010-58416168

联系人：闫超

地址：北京北京市清缘西里