Standard LCD Module
320 x RGB x 240 Dots
3.5” 262K colors TFT display
Wide temperature
With white LED backlight
With Touch Panel

3.5”(diagonal), 320 x RGB x 240 dots, 262K colors, Tran*issive, TFT LCD module.
• Viewing Direction: 12 o’clock.
• Driving IC: SSD2119 or equivalent TFT controller/driver.
• 18-bits data bus (parallel RGB interface/8080 parallel system interface).

• With Touch Panel.
• Logic voltage: 3.3V (t*.).

Pin No. Symbol Description
1-2 LED_K
3-4 LED_A Power supply for LED backlight
5 GND Power supply (system ground)
6 XR
7 YD
8 XL
9 YU
Terminal of touch panel.
10 GND Power supply (system ground)
11-13 NC No connection
14 R*ET System reset pin
15 CS Chip select pin
16 SPCLK Clock pin of serial interface
17 SDA-SDI Data pin of serial interface
18-19 NC No connection
20-25 B[0-5] Blue data 6-bit/18bit bi-directional (D0-D5)
26-27 NC No connection
28-33 G[0-5] Green data 6-bit/18bit bi-directional (D6-D11)
34-35 NC No connection
36-41 R[0-5] Red data 6-bit/18bit bi-directional (D12-D17)
42 HSYNC Line synchronization signal input
43 VSYNC Frame /Ram synchronization signal input
44 DCLK Dot clock signal
45-46 AVDD Supply voltage for lcd driving
47-48 VCC Supply voltage for logic
49 DC Parallel Interface
50 RD I80 system: Serves as a read signal and reads data at the low level.
51 WR I80 system: Serves as a write signal and writes data at the rising edge.
52 PS0
53 PS1
54 PS2
55 PS3
Interface selection pin
56 WSYNC Ram Write Synchronization output
57 NC No connection
58 OE Display enable pin from controller
59-60 GND Power supply (system ground)

  欢迎索取资料