类型:方向阀 材质:铁 型号:电磁铁线圈 品牌:通力 产品别名:阀用电磁铁线圈 适用温度:-10-50（℃） 公称压力:21（MPa） 公称通径:6,10（mm） 类型（通道位置）:直通式 连接形式:螺纹 驱动方式:电磁
用途：
直流MFZ10-YC系列电磁铁，适用于单相桥式全波整流的直流电源，电压至220V的电路中。MFB10-YC系列电磁铁适用于交流50HZ至220V控制电路中。
交流：MFJ10YC系列电磁铁，适用于交流50HZ、电压至380V控制电路中，作为液压电磁换向阀的动力元件。可配套德国力士乐、六、十通径螺纹连接的电磁换向阀。
*当电源为交流时可以选用MFB10-YC交流本整型电磁铁，其性能和MFZ10-YC*相同。
主要技术参数
参数\型号 | MFZ10-22YC | MFZ10（B10）-37YC | MFZ10（B10）-90YC | MFJ10-27YC | MFJ10-54YC |
额定电压(V) | 24 110 220 | 120 | 120 | 110 220 | 110 220 |
额定吸力(N) | ≥22 | ≥37 | ≥90 | ≥27 | ≥54 |
额定行程(mm) | 2.8（3） | 2.8（3） | 3.6（4） | 2.8（3） | 3.6（4） |
全行程(mm) | ≥6.5 | ≥6.5 | ≥8.5 | ≥6.5 | ≥8.5 |
耐*(MPa) | 导磁套均可承受*21MPa | ||||
消耗功率(W) | ≤30 | ≤30 | ≤40 | ≤26 | ≤40 |
*缘等级 | F级 | ||||
连接螺纹 | M20×1 | M20×1 | M26×1.5 | M20×1 | M26×1.5 |
外形及安装尺寸
MFZ10-37YC
MFZ10-90YC
使用注意事项：
●电磁铁采用*合ISO4400标准的插座。有带指示灯、不带指示灯两种规格，您可以根据需要进行选择。带指示灯插座的电压规格*须与电磁铁本体电压规格相*。
●电磁铁的手动推杆用于在调试时或紧急情况下，进行手动控制。但当系统背压较高，调节困难时，请使用十字螺丝刀缓推手推杆，不宜使用冲击力，以免破坏手动推杆和导向内孔表面，造成电磁铁漏油或不能复位。
●当双向使用电磁铁时，*要*两个电磁铁不能同时通电，以免电磁阀不能正常工作。·电气控制系统与电磁铁连接部分之间应设有过流保护装置，以免在非正常情况下，烧毁电磁铁及您的电控元件。
样本说明：
●如顾客有不同的需要，在电磁铁性能不变的情况下，电磁铁与阀体的连接尺寸、推杆伸出长度及工作电源电压可以根据要求调整。
●特性曲线*供参考。
●对*出本样本要求应用场合的，请询问本厂。
●主要性能参数均为试验条件下获得。本公司保留修改参数的权利。
Application:
DC:MFZ10-YC series of hydraulic solenoids apply to circuit of single-phase bridge t*e full-wave rectifier,voltage up to 220V.
AC:MFJ10-YC series of hydraulic solenoids apply to control circuit of AC 50Hz,voltage up to 380V.being used as power unit of hydraulic directional control valves.They can form a complete set of Germany REXROTH,6,10 DN threaded hydraulic directional control valves.
*When the power is AC.The user can choose MFB10YC AC hydraulic solenoids,whose performance is compley the same as MFZ10-YC.
Specifications
parameters\t*e | MFZ10-22YC | MFZ10(B10)-37YC | MFZ10(B10)-90YC | MFJ10-27YC | MFJ10-54YC |
Rated Voltage(V) | 24 110 220 | 120 | 120 | 110 220 | 110 220 |
Rated Force(N) | ≥22 | ≥37 | ≥90 | ≥27 | ≥54 |
| Rated Stroke(mm) | 2.8(3) | 2.8(3) | 3.6(4) | 2.8(3) | 3.6(4) |
| Overall Stroke(mm) | ≥6.5 | ≥6.5 | ≥8.5 | ≥6.5 | ≥8.5 |
Endurable oil pressure(MPa) | Magnetic housing all can endure oil pressure of 21MPa | ||||
Consumption Power(W) | ≤30 | ≤30 | ≤40 | ≤26 | ≤40 |
Insulation grade | Grade F | ||||
oint screw thread | M20×1 | M20×1 | M26×1.5 | M20×1 | M26×1.5 |
External Shape and Installing Dimension
MFZ10-37YC
MFZ10-90YC
Note:
Hydraulic solenoid adopts plug bases meeting the requirements of the ISO4000 or DIN43650 standard. The user can choose at his needs between the two specifications, including plug base with indicator light and plug base without indicator light. The voltage specification of the plug base with indicator light should conform to the voltage specification of the solenoid itself.
The manual jogger of the solenoid should be controlled by hand only in the debugging or critical situation. However, when the backing pressure of the system is pretty high and difficult to adjust, the user should use the cross head driver to slowly push the manual jogger instead of using impact force so as to avoid destroying the manual jogger and the surface of the direction hole which will cause the solenoid to leak the oil and unable to reset.
When the solenoid is used Bi-direction, it should be insured that the two solenoid cannot be electrified at the same time so as to avoid the malfunction of the solenoid.
Overcurrent protection system should be used in the connection part between electric control system and solenoid so as avoid burning the solenoid and electronic control units under improper condition.
Explanation Of Sample:
If client have special requirements,we can adjust the connect dimension,the extended length of push pin,and the supply voltage between solenoids and valve body.
Characteristic curve for reference only.
If the application is beyond the catalogue,please contact with us.
The main performance parameter is obtained in the conditions of lab.Finally explanation and changing of the parameters by Tonly.
友情链接： 深圳市元东发电子有限公司
