用途:木材加工 类型:木材剥皮机 适用对象:木材 产品类型:* 品牌:SGSKJ1380G 型号:-- 产品规格:-- 动力类型:电动 包装:--（mm）
一、机床的主要用途
本机床是胶合板生产线或单板生产线上的重要设备之一，主要用于将有卡旋切机旋切剩余木芯进行二次利用，将长度1400mm，直径不大于ф250范围内的木芯旋切成厚度在0.8-3.0mm间不同厚度的单板。
The use of machine tool
The machine tool is one of the important equiments onveneer board or single board producing lines. It is largely used to take advantage of surplus wood pith which has been revolved and Different thickness single boards between 0.8 to 3.0mm can be revolved and resected from the wood pith on the scope of long 1400mm and diameter less than 250. 二、机床的主要技术参数(MAJOR TECHNICAL PARAMERS)
1.旋切木芯长度：≤1400mm
1.Length of revolving and resecting wood pith:≤1400mm
2.旋切木芯*大直径：≤ф280mm
2.Maximum diameter of revolving and resecting wood pith:≤ф280mm
3.旋切单板厚度：0.8-3.2mm
3.Thickness of revolving and resecting single board:0.8 to 3.2mm
4.剩余木芯直径：≤ф50mm
4.Diameter of surplus wood pith:≤ф50mm
5.出板速度：21m/min
5.Velocity of producing board:21m per 1 min
6.主驱动电机：7.5KW+5.5KW
6.Main driving electriacal machine:7.5KW add 5.5KW
7.进给电机：3KW(YVP100L2-4)
7.Loading and feeding technical machine:3KW(YVP100L2-4)
8.快进退电机：2.2KW
8.Advancing and retreating quickly technical machine:2.2KW
9.油泵电机：1.5KW
9.Oil pump technical machine:1.5KW
10.主机外形尺寸：(长*宽*高)mm
10.The outside measurement of main engine:(length*width*height)mm
11.机床总重量：约4.5吨
11.Total weight of machine tool:about 4.5 ton.
友情链接： 深圳市元东发电子有限公司
