品牌:368
适用于（For use with)：EPSON
Stylus Pro 7600, Stylus Pro 9600, Stylus Pro 10000, Stylus Pro 10000CF, Stylus Pro 10600
Stylus Pro 4000,Stylus Pro 4800/4880,Pro 7800,Pro 9800,Pro 7400,Pro 9400 及维护箱(maintenance tank )
C12C890071等.
R*ET368-II Resetter is versatility; it can automatically identify the t*e of ink cartridge,
and then reset the chip on the cartridge into a full mode. It can be compatible with most of the
Epson intelligent ink cartridges in the market.Instructions for use
In the Epson wide format printer, not only the chip on ink cartridge needs to be reset,
but also on the maintenance tank needs. Figure 3 shows the reset operation of maintenance
tank. Figure 4 shows the reset operation of ink cartridge. Please note that the reset
unit contains a number of notches, which are designed to couple with the various Epson black
and color chipped cartridges.
Rest Procedure:1.Align the chip to the correct notch on the reset unit so that the chip contacts and the pins on the resetter meet.
2.Keep the two units in firm contact. If the red light is blanking, it shows the two units contact well.
3.If the red light turns to green, it shows the reset operation is successful.
4.Cartridge is now ready for refilling with ink.
TROUBL*HOOTING
1.After the red LED flash, it stays on and doesn¡¦t turn green
a). The pins on the resetter are not in good contact with the chip on the cartridge or maintenance tank. The contact may be dirty or oily.
b). If the ink cartridge is not an original Epson brand ink cartridge, the chip may be not compatible with the resetter.
c). If the ink cartridge is an original Epson brand ink cartridge, the chip may be burned out or Epson may have
changed the chip design. But R*ET368-II still can work with this kind of
ink cartridge to fulfill the level, only the green light won¡¦t shine, the red LED does.
2.The printing quality is not good.
a). The quality of the ink you are using may be inferior. We recommend using inks that are specifically matched to
Epson¡¦s original colors and other characteristics. (Especially if you are printing di*al photographs.)
b). Air bubbles entrapped in ink. To avoid this, inject the ink VERY slowly
Also, allow the cartridge to rest for 24 hours with the ink exit nozzles facing down before using.
友情链接： 深圳市元东发电子有限公司
