∟ 光纤收发器(10)∟ 光电隔离/转换中继器(1)∟ 其他光电子、激光器件(2)
品牌:Andylight 型号:YAS3124-1L2 接口类型:卡接口 线缆类型:光纤 传输距离:80以上(m) 传输方式:光波 发射波长:1310(nm) 发射功率:-9---3(dbm) 电压输入:3.3(V)
向广大客户提供从155Mbps到10Gbps的全系列的光纤收发模块:SFP系列、GBIC系列、SFF系列、1x9系列等
1.25Gbps SFP Transceiver
Feature
•Up to 1.25Gbps bi-directional data links
|
• 1310nm Fabry-Perot laser tran*itter
• Duplex LC connector
• RoHS compliant and Lead Free
• Up to 10 km on 9/125μm SMF
• Metal enclosure for lower EMI
• Single power supply 3.3V
• Low power dissipation <500mW t*ical
• Commercial operating temperature range: 0°C to 70°C
APPLICATIONS
• 1.25Gbps 1000Base-LX Ethernet
• 1.06 Gbps Fibre Channel
Andylight YAS-3124-1L2 Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)4. They simultaneously comply with Gigabit Ethernet as specified in IEEE Std 802.31and 1x Fibre Channel as defined in FC-PI-2 Rev. 10.03. They are RoHS compliant and lead-free per Directive 2002/95/EC5
Parameter | Symbol | Min | T* | Max | Unit | Ref. |
Tran*itter | ||||||
Output Opt. power | POUT | -9 |
| -3 | dBm | 1 |
Optical Wavelength | λ | 1270 |
| 1360 | nm | 2 |
Spectral Width | σ |
|
| 3 | nm | 2 |
Optical Modulation Amplitude | OMA | 174 |
|
| μW | 2 ,3 |
Optical Rise/Fall Time | tr/ tf |
|
| 260 | ps | 4 |
Relative Intensity Noise | RIN |
|
| -120 | dB/Hz |
|
Deterministic Jitter Contribution | TX Δ DJ |
| 20 | 56 | ps | 5 |
Total Jitter Contribution | TX Δ TJ |
| 50 | 119 | ps |
|
Optical Extinction Ratio | ER | 9 |
|
| dB |
|
Receiver | ||||||
Average Rx Sensitivity @ 1.25 Gbps (Gigabit Ethernet ) | RSENS2 |
|
| -22 | dBm | 6,7 |
Average Rx Sensitivity @ 1.06 Gbps (1X Fibre Channel ) | RSENS1 |
|
| -23 | dBm | 6,7 |
Stressed Rx sens. =1.25 Gbps |
|
|
| -14.5 | dBm |
|
Average Receiver Power | RxMAX |
|
| 0 | dBm |
|
Receiver Elec. 3 dB cutoff freq. |
|
|
| 1500 | MHz |
|
Optical Center Wavelength | λC | 1265 |
| 1600 | nm |
|
Optical Return Loss |
| 12 |
|
| dB |
|
LOS De-Assert | LOSD |
|
| -24 | dBm |
|
LOS Assert | LOSA | -34 |
|
| dBm |
|
LOS Hysteresis |
| 0.5 |
|
| dB |
|
Notes:
1. Cl* 1 Laser Safety per FDA/CDRH and EN (IEC) 60825 regulations.
2. Also specified to meet curves in FC-PI-2 Rev. 10.0 Figure 18, which allow trade-off between wavelength, spectral width and OMA.
3. Equivalent extinction ratio specification for Fibre Channel. Allows *aller ER at higher average power.
4. Unfiltered, 20-80%. Complies with IEEE 802.3 (Gig. E) and FC 1x eye masks when filtered.
5. Measured with DJ-free data input signal. In actual application, output DJ will be the sum of input DJ and ΔDJ
6. Measured with conformance signals defined in FC-PI-2 Rev. 10.0 specifications.
7. Measured with PRBS 27-1 at 10-12BER
友情链接: 深圳市元东发电子有限公司