AT45DB081D-SU  

8Mbit,SPI接口DateFlash存储器

型号：AT45DB081D-SU

品牌：ATMEL

封装：SOP-8

批号：10+

数量：5000PCS

规格：*原装

8Mbit,SPI接口DateFlash存储器

Density	8M
I/O Pins	8
Interface T*e	SPI, RapidS
Page Size (Bytes)	264
Vcc (V)	2.5, 2.7
Pb-Free Packages	SOIC (150mil)8 SOIC (208mil)8 MLF (VDFN) 8

8M bit, 2.5 or 2.7-Volt Only Serial-Interface Flash

The AT45DB081D is a 2.5V or 2.7V, serial-interface Flash memory ideally suited for a wide variety of di*al voice-, image-, program code- and data-storage applications. The AT45DB081D supports RapidS serial interface for applications requiring very high speed operations. RapidS serial interface is SPI compatible for frequencies up to 66 MHz. Its 8,650,752 bits of memory are organized as 4,096 pages of 256 bytes or 264 bytes each. In addition to the main memory, the AT45DB081D also contains two SRAM buffers of 256/264 bytes each. The buffers allow the receiving of data while a page in the main Memory is being reprogrammed, as well as writing a continuous data stream. EEPROM emulation (bit or byte alterability) is easily handled with a selfcontained three step read-modify-write operation. Unlike conventional Flash memoriesthat are accessed randomly with multiple address lines and a parallel interface,the DataFlash uses a RapidS serial interface to sequentially access its data. The simple sequential access dramatically reduces active pin count, facilitates hardware layout, increases system reliability, minimizes switching noise, and reduces package size. The device is optimized for use in many commercial and industrial applications where high-density, low-pin count, low-voltage and low-power are essential. To allow for simple in-system reprogrammability, the AT45DB081D does not require high input voltages for programming. The device operates from a single power supply, 2.5V to 3.6V or 2.7V to 3.6V, for both the program and read operations. The AT45DB081D is enabled through the chip select pin (CS) and accessed via a three-wire interface consisting of the Serial Input (SI), Serial Output (SO), and the Serial Clock (SCK). All programming and erase cycles are self-timed.

AT45DB081D 特性

• Single 2.5V or 2.7V to 3.6V Supply
• RapidS® Serial Interface: 66 MHz Maximum Clock Frequency
  – SPI Compatible Modes 0 and 3
• User Configurable Page Size
  – 256 Bytes per Page
  – 264 Bytes per Page
  – Page Size Can Be Factory Pre-configured for 256 Bytes
• Page Program Operation
  – Inligent Programming Operation
  – 4,096 Pages (256/264 Bytes/Page) Main Memory
• Flexible Erase Options
  – Page Erase (256 Bytes)
  – Block Erase (2 Kbytes)
  – Sector Erase (64 Kbytes)
  – Chip Erase (8 Mbits)
• Two SRAM Data Buffers (256/264 Bytes)
  – Allows Receiving of Data while Reprogramming the Flash Array
• Continuous Read Capability through Entire Array
  – Ideal for Code Shadowing Applications
• Low-power Dissipation
  – 7 mA Active Read Current T*ical
  – 25 μA Standby Current T*ical
  – 5 μA Deep Power Down T*ical
• Hardware and Software Data Protection Features
  – Individual Sector
• Sector Lockdown for Secure Code and Data Storage
  – Individual Sector
• Security: 128-byte Security Register
  – 64-byte User Programmable Space
  – Unique 64-byte Device Identifier
• JEDEC Standard Manufacturer and Device ID Read
• 100,000 Program/Erase Cycles Per Page Minimum
• Data Retention – 20 Years
• Industrial Temperature Range
• Green (Pb/Halide-free/RoHS Compliant) Packaging Options

AT45DB081D 订购型号

Ordering Code	Package	Lead Finish	Operating Voltage	Max. Freq. (MHz)	Operation Range
AT45DB081D-MU AT45DB081D-MU-SL954 AT45DB081D-MU-SL955	8M1-A	Matte Sn	2.7V to 3.6V	66	Industrial (-40°C to +85°C)
AT45DB081D-SSU AT45DB081D-SSU-SL954 AT45DB081D-SSU-SL955	8S1	Matte Sn	2.7V to 3.6V	66	Industrial (-40°C to +85°C)
AT45DB081D-SU AT45DB081D-SU-SL954 AT45DB081D-SU-SL955	8S2	Matte Sn	2.7V to 3.6V	66	Industrial (-40°C to +85°C)
AT45DB081D-MU-2.5 AT45DB081D-SSU-2.5 AT45DB081D-SU-2.5	8M1-A 8S1 8S2	Matte Sn	25V to 3.6V	50	Industrial (-40°C to +85°C)

 

欢迎您来电订购！

我们的产品路线：·数据转换  · 接口电路  · RF无线电路  · 时钟与振荡器  · 电池管理电路  · 光纤收发器  · 存储管理  · 微控制器 · 运算放大器  · 电源管理电路  · T/E载波收发器  · 开关与复用器  · 传感器  · 电压基准  · 自动识别
　　我们的产品被广泛用于各种基于微处理器的电子设备，包括：消费类电子、个人计算机及外设、手持电子产品、无线及光纤通信、测试设备、仪器仪表、视频播放器、汽车电子等应用

     晶芯博创科技秉承“专注、诚信、*、共赢” 的*理念，坚持以“*微利，规模经营，质优价廉，持续发展”的经营原则，*我们所提供的产品让您百分百满意。“您的满意就是我们的追求!

未来的晶芯博创科技将是一支更*的队伍，更具有较强较快为工厂配单配套的能力

 

公司：深圳晶芯博创科技有限公司

：-36944478 吴

手机：

Q  Q：1137337900

传真：

地址：深圳市福田区世贸广场B座16F

了解更多产品请登录公司网址：https://www.icborch.net/

企业名：深圳福田区晶芯博创电子商行

类型：经销商

电话： 0755-82979912

手机：13510826553

联系人：陈先生

QQ：

邮箱：2355873988@qq.com

地址：广东深圳深圳市福田区深南中路华强北佳和大厦B座706