SSM2302 技术资料
ADI
企业名:深圳福田区晶芯博创电子商行
类型:经销商
电话: 0755-82979912
手机:13510826553
联系人:陈先生
邮箱:2355873988@qq.com
地址:广东深圳深圳市福田区深南中路华强北佳和大厦B座706
The SSM2302 is a fully integrated, high efficiency, Cl*-D stereo audio amplifier. It is designed to maximize performance for mobile phone applications. The application circuit requires a minimum of external components and operates from a single 2.5 V to 5.0 V supply. It is capable of delivering 1.4 W of continuous output power with less than 1% THD + N driving an 8 Ω load from a 5.0 V supply.
The SSM2302 features a high efficiency, low noise modulation scheme. It operates with 85% efficiency at 1.4 W into 8 Ω from a 5.0 V supply and has a signal-to-noise ratio (SNR) that is better than 98 dB. PDM modulation is used to provide lower EMI-radiated emissions compared with other Cl*-D architectures.
The SSM2302 has a micropower shutdown mode with a t*ical shutdown current of 20 nA. Shutdown is enabled by applying a logic low to the SD pin.
The architecture of the device allows it to achieve a very low level of pop and click. This minimizes voltage glitches at the output during turn-on and turn-off, thus reducing audible noise on activation and deactivation.
The fully differential input of the SSM2302 provides excellent rejection of common-mode noise on the input. Input coupling capacitors can be omitted if the dc input common-mode voltage is approximay VDD/2.
The SSM2302 also has excellent rejection of power supply noise, including noise caused by GSM tran*ission bursts and RF rectification. PSRR is t*ically 63 dB at 217 Hz.
The gain can be set to 6 dB or 12 dB utilizing the gain control select pin connected respectively to ground or VDD. Gain can also be adjusted externally by using an external resistor.
The SSM2302 is specified over the commercial temperature range (−40°C to +85°C). It has built-in thermal shutdown and output short-circuit protection. It is available in a 16-lead, 3 mm × 3 mm lead-frame chip scale package (LFCSP).
Functional Block Diagram for SSM2302
Output Power (W) | 2W |
产品型号 | 产品状态 | 封装 | 引脚 | 温度范围 |
---|---|---|---|---|
SSM2302CPZ-R2 | 量产 | 16 ld LFCSP (3x3mm, 1.50mm exposed pad) | 16 | 工业 |
SSM2302CPZ-REEL | 量产 | 16 ld LFCSP (3x3mm, 1.50mm exposed pad) | 16 | 工业 |
SSM2302CPZ-REEL7 | 量产 | 16 ld LFCSP (3x3mm, 1.50mm exposed pad) | 16 | 工业 |
SSM2302Z-EVAL | 量产 | 评估板 | 工业 |
公司:深圳晶芯博创科技有限公司
:-606 吴
Q Q:1137337900
传真:
地址:深圳市福田区世贸广场B座16F
网址:https://www.icborch.net/
企业名:深圳福田区晶芯博创电子商行
类型:经销商
电话: 0755-82979912
手机:13510826553
联系人:陈先生
邮箱:2355873988@qq.com
地址:广东深圳深圳市福田区深南中路华强北佳和大厦B座706
友情链接: 深圳市元东发电子有限公司