| Special Features |  Pulse duty construction
Self-healing
Very low dissipation factor
Negative capacitance change versus
 temperature
According to RoHS 2002/95/EC | | T*ical Applications | For pulse applications e.g.
Switch mode power supplies
TV and monitor sets
Lighting
Audio/video equipment | | Construction | Dielectric:
Pol*ropylene (PP) film
Capacitor electrodes:
Double-sided metallized plastic film
Internal construction: |  | Encapsulation:
Solvent-resistant, flame retardent plastic case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire
Marking:
Colour: Red. Marking: Black. Epoxy resin seal: Red. |
| | | Electrical Data | Capacitance range:
1000 pF to 15 µF (E12-values on request)
Rated voltages:
100VDC, 250VDC, 400VDC, 630VDC, 1000VDC, 1600VDC, 2000VDC, 2500VDC
Capacitance tolerances:
&plu*n;20%, &plu*n;10%, &plu*n;5%
Operating temperature range:
-55°C to 100°C
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistanceat 20°C:
C<0.33 µF:>1 x 105M
(mean value: 5 x 105M)
C > 0.33 µF:>30000 sec (MxµF)
(mean value: 100000 sec)
Measuring voltage: 100V/1 min.
Dissipation factorsat 20°C: tan |
| | Test voltage:
1.6 Ur, 2 sec
Dielectric absorption:
0.05%
Voltage derating:
A voltage derating factor of 1.35% per K must be applied from 85°C for DC voltages and from 75°C for AC voltages.
Reliability:
Operational life > 300000 hours
Failure rate < 1 fit (0.5 x Ur and 40°C)
|
| | at f | C<0.1 µF | 0.1 µF < C<1.0 µF | C > 1.0 µF | 1kHz
10kHz
100kHz | <3 x 10-4
<4 x 10-4
<15 x 10-4 | <3 x 10-4
<6 x 10-4
- | <3 x 10-4
-
- |
| | Maximum pulse rise time:for pulses equal to the rated voltage | Capacitance
pF/µF | max. pulse rise time V/µsec at TA< 40°C | | 100VDC | 250VDC | 400VDC | 630VDC | 1000VDC | 1600VDC | 2000VDC | 2500VDC | 1000...2200
3300...6800
0.01 ...0.022
0.033...0.068
0.1...0.22
0.33...0.68
1.0...2.2
3.3...4.7
6.8...15 | 1000
900
700
400
200
100
70
50
35 | 1800
1200
1100
800
500
300
200
80
50 | 1800
1200
1200
900
500
400
200
100
70 | 1800
1200
1800
1800
900
700
400
150
- | 2800
2800
2100
2100
1400
900
400
-
- | 5400
5400
3000
2100
1400
900
500
-
- | 9000
9000
3400
2100
1400
900
-
-
- | 11000
11000
11000
-
-
-
-
-
- |
| | | | Mechanical Tests | | Packing | Pull test on pins:
d<0.8 Ø: 10 N in direction of pins
d > 0.8 Ø: 20 N in direction of pins
according to IEC 60068-2-21
Vibration:
6 hours at 10...2000Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2in accordance with IEC 60068-2-29 | | Available taped and reeled up to and including case size 15x26x31.5 / PCM 27.5mm. |
|
