正白色
SJ-SPW5630
双佳
发光二*管
是
方片
企业名：中山市东凤镇双佳电子电器厂
类型：生产加工
电话： 0760-22775789
联系人：郑镇雄
地址：广东中山中山市东凤镇电子电器商贸城29栋105卡 厂址∶中山市东凤镇和泰工业区/QQ1015095222
（一）Sealant appearance：封胶外形
(二)Photoelectric parameters：光电参数
※Product Guidelines:产品指南
产品型号（Product Model） | 发光颜色(Emitting Color) | 外观颜色(Lens T*e) |
SJ-SW5630 | 白色（White） | 无色透明(Water Clear) |
※Absolute maximum ratings at Ta=25℃ *大*对额定值
参数(Parameter) | *号(Symbol) | 值(Value) | 单位(Unit) |
功率损耗(Power Dissipation) | Pd | 500 | mW |
正向电流(Continuous Forward Current) | IF | 150 | mA |
反向电压(Reverse Voltage) | VR | 5 | V |
*大脉冲电流(Peak pulsing current) | IFP | 300 | mA |
工作温度范围(Operating Temperature Range) | Tops | -20℃ to 80℃ | |
储存温度范围(Storage Temperature Range) | Tstg | -30℃ to 100℃ | |
*静电能力(Electrostatic Discharge) | *D | 2000(HBM) | V |
*TE:IFP Conditions:Pulse Width≦10msec, and Duty cycle≦1/10
IFP条件:脉冲持续时间≦10msec,占空比≦1/10
※Electrical-Optical Characteristics at Ta=25℃ 电性光电特性
参数（Parameter） | *号(Symbol) | *小值(Min) | 典型值(T*) | *大值(Max) | 单位(Unit) | Test Conditionc 测试条件 |
正向电压(Forward Voltage) | VF | 3.2 | --- | 3.6 | V | IF=150mA |
发光强度(Luminous Intensity) | IV | / | / | / | / | / |
光通量(Luminous flux) | Φ | 40 | --- | 55 | lm | IF=150mA |
反向电流(Reverse Current | IR | / | / | 5 | μA | VR=5V |
冷白光(Cold White）Color Temperature | Tc | 7500 |
| 15000 | K | IF=150mA |
正白光(White）Color Temperature | Tc | 5500 |
| 7000 | K | IF=150mA |
暖白光(Warm White）Color Temperature | Tc | 2600 |
| 5000 | K | IF=150mA |
发光角度(Viewing Angle) | 2θ1/2 | / | 120 | / | deg | IF=150mA |
*TE:1.Tolerance of luminous intensity is &plu*n;15％
发光强度公差为&plu*n;15％
2.Tolerance of forward voltage is &plu*n;0.1V
正向电压公差&plu*n;0.1V
(三)Product features:产品特性
◎发光效率高,光谱窄,单色性好
High luminous efficiency, spectral narrow, monochromaticity good
◎高显色性高,显示色彩*
High color rendering high, show vivid
◎低电压直流驱动,功率低
Low voltage dc drive, power low
◎精密恒流,硅胶封装,低衰减
Precision constant current, silica gel package, low attenuation
◎适用于*表面贴装技术组装生产
Apply to all SMT technology *embly production
◎**合RoHS指令
Fully meet the RoHS instruction
(四)Packing:包装方式
◎采用*静电编带包装
The antistatic taping
◎数量:2000只/盘
Quantity: 2000 only/tray
◎重量:143克/盘
Weight: 143 g/tray
(五)Product application:产品应用
◎户外广告牌,室内室外显示屏,LED日光管,LED发光模组,软硬灯条,背光源,LED灯饰,标准牌,光学指示,汽车内部照明,信号照明等
Billboard, indoor and outdoor display screen, LED solar tube, LED luminous module, soft hard light bars, back light, LED lighting, standard CARDS, optical instructions, car interior lighting, signal lighting, etc
(六)Welding condition:焊接规范
◎材料焊接次数不*过2次.
Material welding times not more than 2 times.
◎焊接时请不要重压LED灯。
During welding please don't weigh LED lamp.
◎焊接后温度未回降到常温时请勿扭曲线路板。
After welding temperature not back to normal temperature when do not distort circuit board.
◎手工焊接时，烙铁温度不高于300℃，每个焊脚焊接时间不*过3秒
Manual welding, the welding temperature is not higher than 300 ℃, each leg welding time not more than 3 seconds
(七)Storage standard:贮存规范
◎请在未准备使用LED之前不要打开*静电袋子.
Please not ready before use LED do not open the anti-static bag.
◎LED在未开封之前应保存在30℃以下,湿度在60%以下的环境中,*长保存期为1年.
LED in the intact before should be kept in 30 ℃ below, humidity below 60% in the environment, the longest retention period for one year.
◎打开包装待后,LED需保存在30℃/40%湿度以下的条件,且*须在7天内使用完.
Open the packing to stay, LED to save in 30 ℃ / 40% humidity the following conditions, and must be in 7 days after use.
◎如果LED*出了第3点要求,则LED*须经过烘烤才能使用,烘烤条件为:60&plu*n;5℃,12个小时
If LED beyond the third point requirements, then LED must p* a baking to use, baking conditions for: 60 &plu*n; 5 ℃, 12 hours
(八)Important Notes:重点注意事项
◎我司颜色等级*参照1931 CIE标准拟定。
We refer to the 1931 CIE that the Clor grading standards proposes.
◎发光强度公差为:&plu*n;15％
The tolerance of luminous intensity is &plu*n;15％
◎正向电压公差为:&plu*n;0.1V
The tolerance of forward voltage is &plu*n;0.1V
◎客户贮存及使用*须*合我司规格参数要求。
Customer storage and use must comply with our requirement.
◎LED光源*,且**属等有害物质.
LED light source no radiation, and does not contain harmful material such as heavy metals.
◎LED光源得以正确使用方可*其寿命,如果对LED使用有任何疑问可咨询我司给予相关技术指导.
LED light source to the correct use of can ensure its life, if the LED use have any question can seek advice we give related technical guidance.
(九)Product shot:实物图片
企业名：中山市东凤镇双佳电子电器厂
类型：生产加工
电话： 0760-22775789
联系人：郑镇雄
地址：广东中山中山市东凤镇电子电器商贸城29栋105卡 厂址∶中山市东凤镇和泰工业区/QQ1015095222
友情链接： 深圳市元东发电子有限公司
